Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in New York City, NY
Alcott Chimney Sweep handles the chimney problems that come with owning, co-oping, or renting out a pre-war building in New York City. Most of the chimneys we open up in this city were built between 1880 and 1930, and a surprising number still use the original clay tile or unlined brick flues that once vented coal stoves. That means a cleaning job in Bed-Stuy, Harlem, or the Upper West Side often reveals conditions suburban sweeps rarely see: shared gang flues, sealed-off fireplaces stuffed with a half-century of debris, and liner questions tied to NYC Department of Buildings code. Call (336) 863-3889 and you’ll get a straight answer about what’s worth doing now and what can wait.
Why New York City Homes Are Different
The housing stock sets the tone. Brownstone rowhouses, railroad tenements, and early co-op buildings dominate whole stretches of Crown Heights, Bushwick, and Central Harlem. Their chimneys were laid for coal, then adapted for wood or gas, often without the liner work a modern installation would require. During gut renovations, we regularly find fireplaces that sat sealed for forty or sixty years. When a contractor opens one up, it’s typically full of collapsed mortar, old nesting material, and enough creosote to make the opening a real hazard until it’s cleaned and inspected.
The climate works against exposed brick stacks, too. New York City’s freeze-thaw cycle runs from November through March, with temperatures swinging above and below freezing on a near-weekly basis. Water soaks into mortar joints, freezes, expands, and slowly spalls the brick. That’s why tuckpointing and liner inspection come up as companion needs far more often here than in milder coastal markets. And because so many pre-war buildings use gang flues – one stack serving several apartments – the job can mean identifying exactly which flue belongs to which unit before any brush goes up.
Our Main New York City Services
Most New York City homeowners call us for one of three reasons: a fireplace that hasn’t been cleaned in years, a suspected liner problem, or a gas fireplace that won’t stay lit. Each service has its own New York City page where pricing and scheduling are covered in detail.
Chimney Sweep in New York City
Cleaning a pre-war flue in New York City usually means more than a quick brush. The original coal-era flues are often oversized and may never have been properly lined for wood or gas use. That changes how we approach the work, and it’s why our sweep service includes a camera check whenever a flue’s history is unknown. Removing creosote – the tar-like buildup that causes chimney fires – is the baseline. The bigger question is always what the liner looks like behind it. See Chimney Sweep in New York City for pricing and what a typical visit includes.

Chimney Inspection in New York City
Inspections here have to account for the building’s age and shared systems. A brick stack that looks fine from the sidewalk can be hiding spalled mortar joints, cracked clay tiles, or a flue that vents the wrong apartment. We document what the camera sees, so you’re never asked to approve a repair based on someone’s word alone. That matters in New York City, where a DOB filing and liner replacement can follow an honest inspection of an unlined coal-era flue. Full details are on Chimney Inspection in New York City.

Gas Fireplace Repair in New York City
Gas fireplaces in pre-war conversions often sit in old hearths that were never designed for them. The venting requirements are different from a wood fire, and a poorly sized flue can leave a unit that shuts off after five minutes or won’t light at all. We work on the common brands found across New York City apartment renovations and diagnose the vent problem before replacing parts. Read what’s covered on Gas Fireplace Repair in New York City.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in New York City
We stock and install parts from Olympia Chimney, Famco, and Copperfield – the trade brands professionals specify, not box-store substitutes. When a liner or cap is needed, we don’t wait a week for a shipment. Most common parts are on hand locally, and our brands page covers what we carry and why we chose it.
Pricing for Chimney Company in New York City, NY
| Service | Typical range in New York City |
|---|---|
| Chimney sweep – single flue, standard | $180 – $340 |
| Chimney sweep – gang flue building, per flue | $210 – $390 |
| Level 1 chimney inspection | $150 – $280 |
| Level 2 chimney inspection with camera | $300 – $525 |
| Chimney cap supply and install | $220 – $450 |
| Flue liner inspection – camera only | $190 – $340 |
| Gas fireplace diagnostic visit | $150 – $240 |
| Gas fireplace valve replacement | $350 – $675 |
| Gas log set installation | $325 – $600 |
| Tuckpointing – per square foot of stack surface | $18 – $35 |
What pushes a New York City price up is usually access: rooftop or ladder work on a four-story brownstone, scaffolding where a stack sits above a party wall, or a gang flue that requires coordinated access across multiple apartments. Every written price is delivered before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in New York City
We work across the boroughs, with most calls concentrated in the low-rise rowhouse and pre-war co-op neighborhoods where original masonry chimneys still dominate. That includes:
- Upper West Side
- Bed-Stuy
- Harlem
- Crown Heights
- Bushwick
Typical scheduling runs one to four business days out, with the fastest response in neighborhoods where our crews are already working that week.
Service Area – Cities Near New York City
Our New York City office coordinates work in the city itself, and we also take calls from nearby communities where the housing stock and chimney conditions are different from Manhattan’s pre-war towers. Homeowners in Brooklyn, OH, Queens, NY, Manhattan, NY, and Staten Island, NY can reach the same team and same written-price guarantee.
Serving New York City, NY - Our Local Coverage Area
We’re based in the New York City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in New York City
Most appointments are scheduled within one to four business days. We don’t promise same-day service, but if there’s active smoke odor or a suspected chimney fire, we’ll tell you immediately what to do and how soon we can be there. Call (336) 863-3889 for the next opening.
Routine sweeping and inspection don’t require a permit. Liner replacement or significant structural work often triggers NYC Department of Buildings review, especially when an unlined coal-era flue is discovered serving a gas appliance. We’ll tell you plainly if the work needs a filing before any repair is approved.
We’ll identify which flue is yours before cleaning starts, and we may need brief access to a neighbor’s unit if the cleanout is there. Apartment coordination is a normal part of New York City work for us. Call (336) 863-3889 and we’ll walk you through what your building’s layout requires.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What New York City Customers Say
"Left no soot anywhere. Even brought a vacuum with a sealed filter. I'd use them again every fall."
- Beth H."Gas fireplace pilot kept going out. Cleaned the burner, replaced the thermocouple, and explained what failed. Works first try now."
- Alicia R."Cap, screen, and a full inspection with photos sent to my phone. Easy to understand and a fair price."
- Tomas Y.





Before
After
Before
After
Before
After