Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Sansom Park
A chimney inspection in Sansom Park typically runs $189 – $349 for a standard Level 1 check, while a Level 2 camera inspection (the one we recommend for any home built before 1980) usually lands between $349 and $599. Most inspections in this part of North Texas take 60 to 90 minutes on site. If you live in Sansom Park and haven’t had a professional look inside your flue in the last three years, call (336) 863-3889 and we’ll get you scheduled.
We know Sansom Park’s homes because we’ve worked on chimneys off Azle Avenue, along Roberts Cut Off Road, and throughout the neighborhoods that sit between Lake Worth and the West Fork of the Trinity River. This is not cookie-cutter suburbia. These are mid-century houses with real masonry fireplaces that have been burning for six or seven decades. The condition of your flue matters more here than almost anywhere else in the metro area.
Scheduling and dispatch for our Sansom Park crews are coordinated from our Dallas-Fort Worth office, but the technicians who come to your door live and work in this area. When you book an inspection with Chimney Inspection through our team, the person we send is someone we’d trust in our own homes.
Why Alcott Chimney Sweep Is Sansom Park’s Preferred Chimney Inspection Company
Homeowners in Sansom Park call us because we do not treat a chimney inspection like a quick look and a handshake. Ruben Castellano built this company in 2002 on a simple idea: a homeowner should always know exactly who is coming to the door and exactly what they’ll pay before any work starts. That standard matters in a tight-knit community like Sansom Park, where many of our customers have lived in the same house their parents or grandparents bought new in the 1950s.
Every technician we send to Sansom Park has passed a background check and identity verification through the Threshold Standard. Before the visit, you will see the technician’s name and photo. When they arrive, they will show a photo ID badge at the door. No exceptions. That is not an add-on service here. It is how we have operated for over two decades.
Our customers in Sansom Park get a written price before any repair begins. The written guarantee on every repair we complete lasts a full 365 days, and if a repair fails within that period, the second visit is free. We do not ask you to take our word on a single recommendation. If we recommend a new liner, a new crown, or a damper replacement, you will see the camera footage that justifies it before you spend a dollar.
There is no waiting on hold when you call us from Sansom Park. A live person answers the phone around the clock. If smoke is backing into your living room at 11 p.m. and you need to know what to do, you will talk to a human being on the first ring.
Chimney Leak in Sansom Park
A Chimney Leak in Sansom Park is usually the first sign that decades of North Texas freeze-thaw cycles and Trinity River moisture have compromised the masonry or crown, letting water into places it was never meant to go. We trace the source before recommending any fix, because a leak that looks like it is coming from the chimney top can actually be seeping through cracked mortar joints, a failed crown, or a damaged flashing where the chimney meets the roof. Leak diagnostics in Sansom Park typically run $149 – $249, with the actual repair priced separately based on what the camera and moisture readings show.
What a leak inspection actually finds here
In Sansom Park homes built in the 1940s through the 1960s, we regularly find chimney crowns that were poured with regular ready-mix concrete instead of a proper chimney crown mix. Decades of freeze-thaw have turned these crowns into fractured puzzle pieces. Water gets in, freezes, expands, and breaks apart more of the structure each winter. The February 2021 storm did visible damage to a lot of crowns in this area.
Tracing leaks before quoting repairs
We do not sell a rebuild on a guess. Our techs use moisture meters and camera runs to find the actual entry point. If the flashing is the problem, you will see exactly where the water is getting through. If the crown is the culprit, we will show you the cracks. No repair gets quoted without evidence you can look at yourself.
Chimney Camera Inspection in Sansom Park
A Chimney Camera Inspection in Sansom Park is the single most valuable service we offer for these older homes, because it is the only way to actually see the condition of original clay flue tiles without tearing open a wall. We run a high-resolution camera up the flue and show you in real time what is there: cracked tiles, gaps between sections, third-degree creosote glaze, or liner damage from an old gas-insert retrofit. Camera inspections in Sansom Park are included with every Level 2 inspection, which runs $349 – $599 depending on the height and complexity of the flue.
Why eyes-on beats a flashlight check
A Level 1 inspection is a visual check of accessible parts. That is fine for a newer home with a clean history. But in Sansom Park, where most houses still carry their original 1950s-era clay tile liners, a visual check from below cannot show you what is happening mid-flue. The camera can. If we see spalled tiles or a gap that is letting heat reach the structure of the house, you will know about it during the appointment, not after a chimney fire.
When a camera run changes the recommendation
Time and again, we run a camera in a Sansom Park chimney that looks fine from the firebox and find a split tile or a section of missing mortar. That changes the repair priority. It is the difference between a cleaning and a liner repair. We would rather show you the evidence and help you make the call than surprise you later.
Trusted Brands We Service in Sansom Park
When a Sansom Park home needs a liner, crown repair, or damper replacement, we install materials specified by chimney professionals, not whatever is cheapest at the hardware store. We carry and service HeatShield resurfacing systems, Gelco chimney caps, and Olympia Chimney products, along with Famco dampers. Because our DFW office keeps these trade-brand parts stocked, we typically can schedule liner and cap work for Sansom Park homes without weeks of waiting on a special order. When your inspection turns up something that needs fixing, we will give you the brand name, the exact part, and the written price before you decide anything.
Common Chimney Inspection Problems We See in Sansom Park Homes
- Cracked or spalled original clay flue tiles. Homes built in the 1940s through the 1960s typically use terra cotta tile liners, and North Texas freeze-thaw cycles have been breaking them apart for decades. The February 2021 Winter Storm Uri accelerated the damage in many chimneys here.
- Glazed third-degree creosote layered over old gas condensate. Many Sansom Park chimneys were converted to gas inserts in the 1970s or 80s, then later switched back to wood. The corrosive residue from the gas era sits under a hardened creosote glaze, so the buildup is harder to remove and more dangerous than routine first-degree creosote.
- Rusted-out dampers and failed crowns. Proximity to the West Fork of the Trinity River means more ambient moisture than most of DFW, and that moisture condenses inside flues, rusting dampers and feeding efflorescence on firebox brick. Crowns that were never built to proper spec are now cracked and leaking.
- Smoke backing into the room even after a sweep. When the flue is structurally compromised, brushing the creosote out does not fix the draft problem. A cracked liner or missing mortar joint will keep pushing smoke back until the structure is repaired.
Pricing for Chimney Inspection in Sansom Park, TX
A straightforward Level 1 inspection in Sansom Park runs $189 – $349. A Level 2 camera inspection, which we strongly recommend for any chimney attached to a pre-1980 home, runs $349 – $599. Level 3 inspections, which involve accessing concealed sections of the flue, start at $599 and go up based on access complexity. Repair work is priced separately and always in writing before anything starts. You will know the brand of any part we recommend, the exact scope, and the final price before you approve the work. Estimates are free. If you want an exact quote for your home, call (336) 863-3889 and we will talk through what your chimney actually needs.
We Also Serve Cities Near Sansom Park
Our crews work throughout the Dallas-Fort Worth metro area and beyond. If you have family or property in Houston, San Antonio, Dallas, or Fort Worth, we can coordinate inspections there too. Sansom Park is home base for many of our customers, but our service area covers the wider region and we keep the same Threshold Standard on every single job.
Serving Sansom Park, TX - Our Local Coverage Area
We’re based in the Sansom Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Sansom Park
If you are burning wood as a primary heat source through the winter, an annual inspection is the minimum. In Sansom Park specifically, where the chimneys are older and many run on original clay liners, we recommend a camera inspection at least every two years even if you only burn occasionally. The moisture from the Trinity River area condenses inside flues and turns creosote into a hardened glaze faster than you would expect. A yearly check catches structural cracks before they become a fire hazard or a carbon monoxide risk. Call (336) 863-3889 and we will schedule you at a time that works.
In most cases, we find cracks, spalling, or gaps between tile sections caused by decades of freeze-thaw. A 1950s clay liner was never designed to handle the heating and cooling cycles of a North Texas climate for 70 years. The camera run will show you exactly where the tiles have failed and whether the flue is still safe to burn. If the liner is shot, we will give you a written price for a HeatShield resurfacing or a new liner system, and you can decide from there. No pressure, no guesswork.
Gas appliances produce acidic condensate that corrodes the inside of the flue over time. When a chimney is later used for wood burning, fresh creosote builds up on top of that corrosive residue. The result is a hard, glazed creosote that is much harder to remove than the fluffy first-degree kind, and it is also more likely to ignite. This exact scenario is extremely common in Sansom Park, where retrofitted gas inserts from the 1970s and 80s were often abandoned back to wood with no liner inspection in between. We check for this specifically on every Level 2 camera inspection. Call (336) 863-3889 if you suspect your chimney has this history.
Smoke backing into the room after a sweep almost always means a structural problem, not a dirty chimney. In Sansom Park, the usual culprits are cracked clay tiles, gaps in the mortar joints, or a rusted damper that no longer opens properly. These older masonry chimneys also have flue dimensions that were sized for a different era of wood burning, and an oversized flue will not draft correctly. A camera inspection shows us what is actually wrong, and then we can fix it with the right repair instead of guessing. We will give you a written price first.
No, and please do not try. That is how chimney fires start. Third-degree glazed creosote does not burn off with a hot fire; it ignites and burns at extremely high temperatures that can crack liners and spread into the structure of your house. In Sansom Park homes with original clay liners, the risk is even higher because a chimney fire will fracture already-fragile tiles and turn a maintenance issue into a serious structural repair. The only safe way to remove glazed creosote is professional mechanical removal, often followed by a resurfacing product like HeatShield if the liner has been compromised. If you are seeing heavy buildup, call (336) 863-3889 and our team will take a look before you light another fire.
Contact Alcott Chimney Sweep in Sansom Park
Ruben Castellano and the Alcott Chimney Sweep team have been doing this work since 2002, and we are not going to tell you a chimney is unsafe unless we can show you the evidence. Every inspection in Sansom Park includes a written report, camera footage when we use it, and a straight answer about what needs fixing now and what can wait. If it can wait, we will say so. If it cannot, you will see exactly why.
Call (336) 863-3889 today for a free estimate. A real person will answer the phone, and by the time our technician arrives at your door in Sansom Park, you will already know their name and what they look like. That is how it should work.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep, serving homeowners since 2002 through the Threshold Group family of home-service companies.





Before
After
Before
After
Before
After