Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Loomis
A standard chimney sweep in Loomis typically runs $189 – $289 for a single flue, and most homes with an open fireplace are done in 60 – 90 minutes. If you burn oak cut from your own property, expect stage-2 creosote that takes real mechanical work to remove, which lands on the higher end of that range. That’s the honest starting point before anyone quotes you repairs. Call (336) 863-3889 and you’ll get a written price before we start, not a vague estimate after the fact.
We know Loomis differently than a Sacramento company that sends a truck up the hill. The properties here run one to five acres, the chimneys belong to houses built between the late 1960s and the 2000s, and the fireplaces actually heat rooms from November through March. A Loomis chimney sweep visit has to account for that. Our crews are dispatched from the Sacramento office and serve Loomis locally, so the person who shows up at your door knows the difference between a decorative fireplace in Roseville and a wood stove that’s been running as primary heat on a blue oak parcel off Horseshoe Bar Road.
Why Alcott Chimney Sweep Is Loomis’s Preferred Chimney Sweep Company
We’ve been doing this since 2002, and the model hasn’t changed: every technician who steps onto your property has passed a background check and identity verification before the truck leaves the office. This is the Threshold Standard, and it’s why we send you the technician’s name and photo before arrival. You’ll know exactly who’s knocking before you open the door. Ruben Castellano built Alcott around a simple idea: if you can’t verify who’s in your home, nothing else about the visit matters.
In Loomis, where lot sizes are large and many customers are home alone when we arrive, that identification matters more than it does in a dense subdivision. The technician will show a photo ID badge at the door. Every time. No exceptions. This isn’t a policy we test occasionally; it’s the baseline for every single visit we make in this town.
Our 365-Day Done Right Promise applies to every repair we complete in Loomis. If the work isn’t right within a full year, the second visit is free. That’s a written guarantee, handed to you before we start the job, not a spoken assurance. It covers the repair, the labor, and the return trip.
We also answer the phone with a live person around the clock. If you smell smoke at 11 p.m. on a December night, a human picks up. Not a voicemail tree, not a callback queue. That’s standard for us, not a premium service tier.
Chimney Sweep Services in Loomis
Chimney Sweep Services in Loomis mean something specific here: a mechanical sweep of every appliance flue on the property, plus a visual check for the freeze-thaw damage that comes with sitting at 400 – 600 feet of elevation. A single-flue sweep on an open fireplace runs $189 – $289. Each additional flue, whether it’s a wood stove in a detached workshop or a gas insert on the main hearth, adds $89 – $139. We photograph what we find, so you’re never taking our word for a problem you can’t see.
Multiple Flues, One Visit
Homes around Loomis often carry more than one fire appliance. A ranch-style house with a masonry fireplace, a gas insert in the family room, and a freestanding wood stove in a guest cottage is not unusual. Each of those flues gets swept as part of the visit. We don’t do one pass through the main chimney and check the others off on the invoice. The quote covers the whole property before we begin.

Freeze-Damage Spot Check
Because Loomis gets hard winter freezes that the Sacramento Valley floor rarely sees, every sweep here includes a visual check of the crown and top mortar courses. Freeze-thaw cycling is what cracks a crown and lets water into the flue, and it’s a pattern we see constantly on Loomis properties built before 2000. If we find it, we’ll show you photos and quote the repair separately. If the crown is sound, we’ll tell you that too.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Cleaning in Loomis
Chimney Cleaning in Loomis is often a creosote-removal job more than a soot-removal job. The difference matters. Soot brushes off easily. Stage-2 creosote, the tar-like buildup that burns like fuel and causes chimney fires, has to be mechanically removed with rotary loops and scrapers. If you’ve been burning oak cut from your own trees the previous season, that’s what we’re dealing with. A heavy creosote cleaning on a Loomis property runs $249 – $349 depending on flue length and buildup, and it takes longer than a standard sweep.
Creosote Removal on Arceage Properties
Green or under-seasoned oak smolders at lower flue temperatures and deposits creosote far faster than kiln-dried wood. We see it on nearly every acreage lot in Loomis where the homeowner fells, splits, and burns their own wood. That’s not a judgment. It’s just what the flue tells us. The fix is a heavier mechanical sweep now and a more realistic cleaning interval going forward, often fall and spring instead of once a year.
Detached Structure Flues
Barns, workshops, and guest cottages with their own stovepipe or insert installations get skipped more often than any other chimney on the property. They’re out of sight, they’re not the pretty fireplace in the living room, and they go uninspected for years. We sweep every flue you have, including the one in the back building. Those are exactly the installations where we find the thickest creosote and the most advanced freeze damage, because nobody’s looked at them since they were put in.
Trusted Brands We Service in Loomis
We install and service professional trade brands, not box-store substitutes. On Loomis jobs, that means DuraFlex liner systems when a flue has to be relined, and Copperfield components when we’re repairing or upgrading a chase cover or cap. If you have a Famco or HeatShield system already in place, we service those too. We carry the common parts for these brands on the truck, which means fewer return trips and faster turnaround when a Loomis homeowner needs a repair done before the next cold snap. When a liner has to be measured and ordered, we tell you the lead time before we take the deposit.
Common Chimney Sweep Problems We See in Loomis Homes
- Stage-2 creosote from home-harvested oak. Loomis homeowners regularly fell, split, and burn their own blue oak and valley oak, often before it’s seasoned a full 12 – 18 months. The result is thick, tar-like creosote that standard brushes won’t remove and that burns hot enough to crack a flue liner if it ignites.
- Spalled crowns from freeze-thaw cycling. At 400 – 600 feet, Loomis gets hard freezes the valley floor avoids. Water seeps into small crown cracks, freezes, expands, and opens the crack wider. After two or three seasons, the crown needs resealing or replacement, and most homeowners never notice because they never look at the top of the chimney.
- Skipped flues on detached structures. Barns, workshops, and guest cottages with their own stovepipe or insert installations are common on the larger horse properties around Loomis, and those flues get forgotten. We’ve pulled uninspected stovepipes with creosote an inch thick, and they’re consistently the most dangerous chimneys on the property.
- Multi-appliance homes treated as single-flue jobs. A house with a masonry fireplace, a gas insert, and a freestanding stove needs each appliance swept and inspected. One pass through the main chimney isn’t a complete job. The Loomis homes that actually heat with wood all winter need a Level 2 inspection on the primary appliance every year, not just a visual glance.
Pricing for Chimney Sweep in Loomis, CA
A standard single-flue sweep in Loomis runs $189 – $289. Add a second or third flue and each one is $89 – $139 more. If we’re doing heavy creosote removal on an acreage home burning green oak, that’s $249 – $349 per flue, because it takes real mechanical work and double the time. A Level 2 inspection runs $299 – $449 and is worth it on any home where the primary fireplace or stove has been in serious use for more than a few years. Every quote is written and delivered before any work starts. Call (336) 863-3889 for an exact price on your property, and we’ll tell you plainly whether anything we find can wait or needs attention now.
We Also Serve Cities Near Loomis
Our Chimney Sweep team works throughout the foothills and the valley edge, and we regularly schedule Loomis jobs alongside visits to Rocklin, Granite Bay, Newcastle, and Roseville. If you’re on the border or just outside Loomis proper, call us. We’ll tell you honestly whether a Chimney Sweep in Loomis visit makes sense for your address or if a different route date works better.
Serving Loomis, CA - Our Local Coverage Area
We’re based in the Loomis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Loomis
Every six months if you’re burning oak cut from your own property, even if you think it’s seasoned. Green or under-seasoned oak stacks creosote twice as fast as kiln-dried wood, and we see tar-like stage-2 deposits on Loomis acreage lots in a single burn season. A fall-and-spring schedule is the minimum for most of these homes. Call (336) 863-3889 and we’ll give you a straight answer based on how you actually burn.
Freeze-thaw cycling. Loomis sits at 400 – 600 feet, where hard winter freezes cycle moisture through chimney mortar and crowns in a way the warmer Sacramento Valley floor never sees. The crown absorbs water, the water freezes and expands, and hairline cracks widen into structural gaps over two or three seasons. A standard sweep alone won’t fix it. The crown needs cleaning, sealing, and sometimes partial rebuilding, which we quote separately and photograph before we start.
Yes, if you tell us up front. The visit covers every flue on the property, including the one in the barn or workshop. Each flue is priced separately, follows the $89 – $139 per additional flue range, and gets its own visual inspection. The main fireplace’s flue also needs a Level 2 inspection if it’s been carrying serious winter use. Call (336) 863-3889 and describe the property layout, and we’ll quote the whole job before we arrive.
Stage-2 creosote is a thick, tar-like residue that looks like black pancake syrup hardened inside the flue. It forms when wood smolders at low temperatures, which is exactly what green oak does when it’s cut from your own trees and burned before it’s fully seasoned. It’s the layer that actually fuels chimney fires, and it’s the most common thing we remove in Loomis homes. It can’t be brushed out with a standard sweep; it takes rotary mechanical removal, and that’s why the price runs higher when we find it.
Yes, in most cases. If the liner has cracks or erosion from freeze-thaw or creosote ignition, the standard fix is a DuraFlex stainless steel liner installed through the existing flue. We measure, quote the liner and installation separately, and complete the work in a single visit once parts are on hand. If the liner is intact but the crown or mortar joints are failing, we repair those directly. Nothing gets recommended without camera photos you can see yourself.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep. Serving Loomis and the surrounding foothills since 2002.





Before
After
Before
After
Before
After