Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Gas Fireplace Repair Across Everett
If your gas fireplace in Everett won’t light, cycles off mid-burn, or leaves a faint exhaust smell in the room, the most common culprits are corrosion on the thermopile, a partially blocked flue, or a venting mismatch that’s been there since the house was built. Our Gas Fireplace Repair team diagnoses the exact cause before quoting anything, and you see camera evidence of what we found. We serve every Everett neighborhood from Riverside to Silver Lake to View Ridge, and we answer the phone around the clock at (336) 863-3889.
Why Alcott Chimney Sweep Is Everett’s Preferred Gas Fireplace Repair Company
Everett homeowners call us because we show our work. Before we recommend a new thermopile, a liner, or a cap, you’ll see the corrosion, the crack, or the blockage on our inspection camera screen. No one here will tell you a repair is needed based on a hunch. That matters in a city where marine air accelerates rust on every exposed metal surface, and where six decades of retrofitted gas appliances sit inside flues that were never built for them.
Ruben Castellano set the standard for this company back in 2002: every technician who shows up in Everett is background-checked, identity-verified, and sent to you by name and photo before arrival. That’s the Threshold Standard, and it applies to every single visit. You’ll know who’s coming, what they look like, and that they’ve been vetted before they ring the doorbell. When the repair is done, you get a written guarantee. If it fails, the second visit is free. That’s our 365-Day Done Right Promise, and it covers every gas fireplace repair we complete in Everett.
Our Gas Fireplace Repair Services in Everett
Gas Fireplace Diagnostic Inspection with Camera Evidence
A gas fireplace that won’t stay lit in Everett is usually fighting one of two things: salt-corrosion on the pilot assembly or a flue that’s not drafting properly. We run a full diagnostic with a camera inspection of the firebox, the burner tray, and the flue. You see what we see, and we explain exactly what’s wrong before any repair quote is written. In neighborhoods like Glacier View and Sunnyside, where marine fog moves in off Possession Sound, we routinely find thermopiles that look fine from the outside but are caked with white corrosion underneath.
Flue Relining for Gas Appliance Venting
If your Everett home was built during the Boeing expansion years, there’s a good chance your gas log set vents into an original clay-tile flue that was sized for an open wood fire. That’s a problem. Gas exhaust is cooler than wood smoke, so it condenses inside the tile, eats at the mortar, and lets carbon monoxide seep back into the house. We install DuraFlex liner systems sized for your specific gas appliance, sealed top to bottom, so the exhaust leaves the house instead of lingering in your living room.
Chimney Cap and Damper Repair for Marine Climate Corrosion
Living blocks from Puget Sound means your chimney cap and damper take a beating from salt-laden air, months of steady rain, and the occasional hard freeze. Rusted dampers don’t close properly, which sends your conditioned heat straight up the flue all winter. We replace corroded caps with Copperfield units built to handle marine exposure and repair or replace dampers so they actually seal. For homes in Riverside and Delta, where the Snohomish River adds extra humidity to the air, this is often the difference between a fireplace that works and one that fights you every time you light it.
Gas Log Set and Burner Repair
In the 1970s, a lot of Everett homeowners swapped wood-burning fireplaces for gas log sets without refitting the flue. Those retrofits are still in daily use, with burners that have been burning unevenly for decades and orifices that have slowly erroded from salt-moisture exposure. We service and replace burner assemblies using professional-grade parts from Olympia Chimney and Famco, and we always verify the venting path before we fire anything up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everett
We stock and install parts from the brands chimney professionals actually specify: DuraFlex for liner systems, Olympia Chimney for firebox components, Famco for caps and termination hardware, and Copperfield for marine-grade accessories. If your Everett gas fireplace needs a replacement thermopile, burner, or cap, we’re not ordering a no-name substitute from a big-box retailer. We use the same materials we’d put in our own homes, and we keep common parts on our Seattle dispatch trucks so a simple repair doesn’t mean waiting two weeks for shipping.
Common Gas Fireplace Repair Problems We See in Everett Homes
- Intermittent pilot outages from marine corrosion. Salt-laden fog off Puget Sound works into the pilot assembly and corrodes thermocouples and thermopiles. Your fireplace lights fine in October, then refuses to stay lit by February. We’ve pulled thermopiles from Riverside fireplaces that looked like they’d been dipped in chalk dust.
- Undersized flues from 1970s retrofits. Boeing-era tract homes in neighborhoods like Pinehurst and Holly had wood stoves or gas log sets retrofitted into clay-tile flues never designed for gas exhaust. The flue is too large, the exhaust cools too fast, and condensation rusts out the damper and firebox from the inside.
- Corroded chimney caps and dampers failing to seal. The freeze-thaw cycle in Snohomish County accelerates spalling on saturated brick, and marine fog corrodes the metal components faster than you’d see in Bellevue or Redmond. A cap that’s rusted through lets rain fall straight down the flue onto your burner.
- Carbon monoxide risk from negative draft. When a gas fireplace vents into an oversized or deteriorated flue, exhaust gases can stall and push back into the living space. This is the most serious issue we find in Everett, and it’s why we recommend a camera inspection before every repair.
Pricing for Gas Fireplace Repair in Everett, WA
A gas fireplace diagnostic inspection with camera evidence in Everett typically runs $150 to $250, depending on the fireplace type and how accessible the flue is. Thermopile or thermocouple replacement generally falls between $180 and $350 including parts and labor. A full DuraFlex liner replacement for a 1970s-era retrofit flue in a Boeing tract home usually lands between $2,800 and $4,500, depending on the flue length and access. Chimney cap replacement with a marine-grade Copperfield unit runs $350 to $700 installed. Every job includes a written price before work begins, and every repair carries our 365-Day Done Right Promise. If it fails within the coverage period, the second visit is free. For an exact quote on your Everett fireplace, call (336) 863-3889.
We Also Serve Cities Near Everett
Our Everett crews also cover Marysville, Lake Stevens, Mukilteo, and Snohomish. If you’re in one of those communities and need gas fireplace repair, the same background-checked technicians and written guarantees apply. Response times to the wider Snohomish County area are typically within one to two business days for non-urgent repairs.
Serving Everett, WA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gas Fireplace Repair in Everett
The most common cause we see in Everett is corrosion on the thermopile or thermocouple from salt-laden marine air, especially in homes within a mile of Puget Sound or the Snohomish River. The pilot assembly looks fine until you remove it and see the white buildup underneath. We replace the corroded component, test the pilot over multiple cycles, and show you the old part before we leave. Call (336) 863-3889 to schedule a diagnostic.
You won’t know without a camera inspection, and that’s the straight answer. Clay-tile flues in Everett homes built before 1970 were typically sized for open wood fires, not gas exhaust. Gas burns cooler, so exhaust condenses inside the tile and erodes the mortar joints. If your flue has cracks, gaps, or spalling visible on camera, it’s not safe for gas venting. We’ll show you the footage and explain whether relining is necessary or if the flue can safely wait another season. Estimates are free at (336) 863-3889.
Yes. Marine fog carries salt particles that settle on exposed metal surfaces and accelerate corrosion. In Everett’s older neighborhoods along Marine View Drive and in Delta, we routinely see thermopiles, burner orifices, and damper hardware that have rusted through in half the time you’d expect in an inland city. A repair that lasts a decade in Lake Stevens might flash-surface rust within two burn seasons here. That’s why we use marine-grade materials and recommend annual inspections for waterfront properties.
Possibly, but many of those retrofits from the 1960s and 1970s were never properly relined for gas appliance exhaust. The original clay-tile flue is often oversized for a gas log set, which lets exhaust cool and condense inside the chimney. That condensation is acidic, and it eats away at the mortar joints and damper from the inside. If the flue is cracked or the damper is rusted through, the unit is not safe to burn. We can inspect the flue with a camera and tell you exactly what condition it’s in. Call (336) 863-3889 to book an inspection.
At least once a year if you burn regularly, and before the start of burning season if you’re in a salt-exposed neighborhood like Riverside, Delta, or anywhere along Marine View Drive. Everett’s marine climate means metal components corrode faster here than in inland Snohomish County. An annual inspection with camera evidence catches pilot corrosion and early liner damage before they turn into a carbon monoxide risk. For scheduling, call (336) 863-3889.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep, serving Everett since 2002.