Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Gas Fireplace Repair Across Loomis
Gas fireplace repair in Loomis typically costs $180 to $380 for common fixes like pilot assembly replacement or thermocouple work, while a full liner installation runs $1,200 to $2,800 depending on flue height and access. Most repairs are completed in a single visit. If you’re in Loomis and your gas logs won’t stay lit, smell odd on startup, or the pilot keeps going out, call Alcott Chimney Sweep at (336) 863-3889. We’re Ruben Castellano’s team, and we’ve been working on Loomis fireplaces long enough to know that the problem is rarely what the homeowner thinks it is.
Why Alcott Chimney Sweep Is Loomis’s Preferred Gas Fireplace Repair Company
Loomis homes aren’t like Roseville tract houses or Granite Bay custom builds. They’re ranch-style places off King Road, horse properties off Val Verde, acreage lots along Horseshoe Bar Road where the fireplace was built in 1972 and the gas log set was added in 2005. That combination, an old wood-burning firebox with a gas appliance dropped into it, is where our repair work in Loomis actually happens. We know the housing stock here, and we know what the original clay-tile flues under those chimneys look like after fifty years of freeze-thaw cycling.
Every Alcott Chimney Sweep technician is background-checked and identity-verified under the Threshold Standard before they ever pull into your driveway. You’ll know the technician’s name and see their photo before we arrive, and they’ll show a photo ID badge at the door. Every job comes with a written price before any work starts, and a written guarantee on every repair. If the repair fails within the coverage period, the second visit is free. That’s the 365-Day Done Right Promise, and it applies in Loomis just like everywhere else we work.
Our Gas Fireplace Repair team coordinates scheduling from our Sacramento office, but the crews serving Loomis know this town. They know the oak-covered lots, the horse properties, the detached workshops with their own stovepipe runs. That local familiarity means we show up already understanding what we’re likely to find.
Our Gas Fireplace Repair Services in Loomis
Gas Fireplace Repair
When a gas log set in Loomis won’t light or won’t stay lit, the cause is usually one of three things: a clogged pilot orifice, a failing thermocouple or thermopile, or a draft problem caused by the flue the appliance is vented into. We repair all three. We carry pilot assemblies, thermopiles, refractory panels, and burner components for the gas log sets and inserts most common in Loomis homes. We don’t patch things that need replacing, and we don’t replace things that just need cleaning.
Level 2 Inspection
A Level 2 chimney inspection is a camera inspection of the entire flue, and in Loomis it’s the single most useful diagnostic step before any gas fireplace repair. The homes here, built from the late 1960s through the 2000s, often have original clay-tile liners that were never designed for gas venting. The burner might be fine. The flue might not be. A Level 2 inspection shows us exactly which one is the problem, and we’ll show you the footage. You don’t take our word for it. You see it.
Chimney Liner Installation
This is the repair Loomis homeowners get told they need most often, and it’s also where the industry’s worst upselling happens. Here’s how we handle it: we never recommend a liner without camera evidence. If the camera shows a cracked clay tile, missing mortar, or a flue that’s oversized for a gas appliance, we’ll show you the exact footage and explain why a properly sized DuraFlex liner will fix the draft and safety issues. If the camera shows a flue that’s fine for gas use, we’ll tell you that too, and you’ll save the cost of a liner you don’t need.
Chimney Sweeping
Even homes with gas fireplaces in Loomis need the chimney swept, especially if the fireplace shares a flue with a wood stove or if wood was burned in the same firebox before the gas logs went in. Loomis residents burn a lot of locally harvested oak, often under-seasoned, and that produces stage-2 creosote: the tar-like, glazed buildup that causes chimney fires. Sweeping removes that hazard and gives us a clear view of the flue condition before any gas repair work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Loomis
We install and service products from the brands chimney professionals actually specify: DuraFlex liner systems, Olympia Chimney components, Famco venting, and Copperfield products. These aren’t box-store substitutes. When a Loomis home needs a new pilot assembly or a liner section, we’re installing the same materials a working chimney contractor would put in their own house. Because Loomis sits just far enough from major supply houses that parts runs can kill half a day, we keep common repair components stocked on our trucks.
Common Gas Fireplace Repair Problems We See in Loomis Homes
- Pilot outages and gassy smells on startup. Gas logs installed in original clay-tile flues never designed for gas venting spill combustion byproducts back into the room when the draft is weak. The burner isn’t broken. The venting is wrong, and that’s what needs fixing.
- Spider webs in the pilot orifice. This is more common in Loomis than people expect, especially on acreage properties with barns, workshops, and lots of insect life. A single web blocks the gas flow and the pilot won’t hold. It’s a fifteen-minute fix once we find it.
- Cracked refractory panels. The refractory panels behind the log set crack over time, especially in Loomis where fireplaces run hard from November through March. A cracked panel directs heat at the firebox walls and can make the unit unsafe to operate.
- Freeze-thaw damage to the crown and mortar joints. Loomis sits in the Sierra foothills at 400-600 feet elevation, and hard winter freezes cycle moisture through chimney crowns and mortar joints. That moisture eventually reaches the firebox, corroding the gas burner assembly from the outside in.
Pricing for Gas Fireplace Repair in Loomis, CA
A standard gas fireplace service call in Loomis runs $180 to $380, which covers diagnosis, pilot cleaning or adjustment, thermocouple replacement, and similar component-level work. Pilot assembly replacement, including the part, runs $250 to $450. Refractory panel replacement typically falls between $300 and $700 depending on the log set size. A Level 2 camera inspection costs $150 to $350, and we apply that fee toward any liner work if the inspection shows one is needed. Chimney liner installation with DuraFlex materials runs $1,200 to $2,800 in Loomis, driven mostly by flue height, roof pitch, and whether we’re working from a ladder or scaffold. Every job gets a written price before work starts, so the number you approve is the number you pay. Call (336) 863-3889 for a free estimate.
We Also Serve Cities Near Loomis
Our Gas Fireplace Repair in Loomis service area includes homes throughout the town and along the surrounding foothill corridors. We regularly work in Rocklin, Granite Bay, Newcastle, and Roseville, where the housing stock is different but the same standards apply: background-checked technicians, written pricing before work begins, and a written guarantee on every repair.
Serving Loomis, CA - Our Local Coverage Area
We’re based in the Loomis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gas Fireplace Repair in Loomis
Not automatically. Whether you need a liner depends on what the camera shows. Many homes in Loomis have gas log sets vented into original clay-tile flues that are oversized for gas use, which causes poor draft and spillage. If your flue is cracked, missing mortar, or sized wrong for the appliance, a properly sized liner is the repair that actually fixes the problem. If the flue is sound, we’ll tell you that plainly and repair only what’s broken. Call (336) 863-3889 and we’ll show you the footage before we recommend anything.
That smell usually means the combustion byproducts aren’t drafting up the flue properly. In Loomis, we see this most often in older ranch-style homes where a gas log set was installed into a wood-burning fireplace without updating the venting. Cold winter air in the foothills makes the draft worse, pushing exhaust into the room instead of up the stack. It’s worth a camera inspection to see whether the flue is the issue. We’ll identify the cause before recommending work, and nothing gets sold without visual proof.
It can be either, and the difference matters. A pilot that lights but won’t stay lit usually points to a failing thermocouple or a clogged pilot orifice, which is a repair. A fireplace that lights but produces ghosting, soot, or weak flames often points to a drafting issue caused by creosote buildup or poor venting, which is a cleaning or liner issue. We diagnose both on the same visit, and we show you what we find before doing any work.
No, and this comes up constantly in Loomis because so many homes burn wood as real supplemental heat. A gas log set and a wood fire have completely different venting requirements, and running both through the same flue creates safety hazards: creosote from the wood can block the gas draft, and gas exhaust can accelerate deterioration of the creosote. If you want to burn wood, remove the gas log set. If you want the gas logs, have the flue inspected and properly lined for gas-only use.
Once a year, ideally in late summer or early fall before the burning season starts. Loomis homes run fireplaces hard from November through March, and the freeze-thaw cycles at our elevation take a real toll on chimney crowns and mortar joints. An annual inspection catches small problems like spider webs, corroded burner components, and early spalling before they become expensive repairs. Call (336) 863-3889 to schedule yours.
Key Takeaways
- Gas fireplace repair in Loomis runs $180-$380 for common fixes; liner installation runs $1,200-$2,800.
- The most common Loomis repair issue is a gas log set vented into a clay-tile flue never designed for gas.
- We never recommend liner work without showing you the camera footage first.
- Every technician is background-checked and identity-verified, announced by name and photo before arrival.
- Every repair carries a written guarantee. If it fails, the second visit is free.
Call Alcott Chimney Sweep for Gas Fireplace Repair in Loomis
At a ranch-style home off King Road in Loomis, a homeowner called us because the pilot kept going out and the fireplace smelled gassy on startup. Our tech pulled the burner assembly, found a spider web clogging the pilot orifice and a cracked refractory panel behind the log set, and confirmed with a camera that the original clay-tile flue had no dedicated gas liner. We replaced the pilot assembly, swapped the damaged refractory, and installed a properly sized DuraFlex liner. The unit now lights reliably and drafts correctly. That’s the kind of repair we do in Loomis every week. If your gas fireplace is acting up, call (336) 863-3889 for a free estimate. A live person answers, every time.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep. Our team serves Loomis residents with background-checked technicians, written pricing before work begins, and a 365-Day Done Right Promise on every completed job.