Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Gas Fireplace Repair Across Spring
A gas fireplace that won’t light, won’t stay lit, or smells wrong when it runs usually points to one of three things in Spring: a corroded firebox panel on an aging zero-clearance unit, a blocked or rusted flue, or a gas valve that’s failed after years of Gulf humidity. Most repairs in this area run $160 to $430, and we’re typically able to diagnose the problem on the first visit with a camera inspection you can watch alongside us. Call (336) 863-3889 and we’ll walk you through what to expect before anyone knocks on your door.
We work throughout Spring, from the Champions-area subdivisions off Cypresswood to the neighborhoods along Louetta and Rayford Road. When the cold front finally pushes through in November and your fireplace won’t cooperate, you shouldn’t have to wait a week to find out why.
Why Alcott Chimney Sweep Is Spring’s Preferred Gas Fireplace Repair Company
Ruben Castellano leads our team, and the standards he’s put in place since 2002 are the reason Spring homeowners keep calling us back. Every technician who comes to your house is background-checked and identity-verified before they ever step onto your property. That’s the Threshold Standard, and it’s not an add-on or a premium tier. It’s how we’ve always operated. You’ll know the technician’s name and see their photo before we arrive, and they’ll show a photo ID badge at the door. Every time. No exceptions.
We’re not the cheapest shop in the greater Houston area, and we don’t try to be. What we offer is certainty: a written price before any work starts, a written guarantee on every repair, and a free return visit if that repair fails within the coverage period. Our 365-Day Done Right Promise means a full year of accountability on every job we complete in Spring. If something isn’t right, we make it right, at no charge to you.
The homes we service in Spring are mostly 30 to 50 years old, and their gas fireplaces came out of the factory around the same time the subdivision went in. We know these units. We know what fails on them in this climate, and we know what a camera should look like inside a clean, properly sized flue. That local experience means we’re not guessing when we hand you a diagnosis.
Our Gas Fireplace Repair Services in Spring
Gas Fireplace Repair and Diagnostic
When a gas fireplace in Spring won’t light, won’t stay lit, or produces a weak yellow flame instead of a clean blue one, we start with the basics and work through the system methodically. Thermocouple and thermopile failures are common on units that sat dormant through a humid Harris County summer. We test the full ignition sequence, verify gas pressure, and inspect the firebox and burner before we tell you what’s wrong and what it’ll cost to fix.

Level 2 Camera Inspection With Homeowner-Visible Evidence
This is the service that separates us from a guy with a flashlight. We run a camera down the entire flue and into the firebox, and we show you the footage on the spot. If we’re recommending a liner replacement or a crown repair, you’ll see the rust, the spalling, or the animal nest with your own eyes. In Spring, where humidity quietly destroys flue interiors while the fireplace sits unused for ten months a year, this is the only honest way to recommend work. Nothing gets recommended without evidence you can see for yourself.

Chimney Cap and Crown Repair
A missing or rusted chimney cap in Spring isn’t just a nuisance. It’s an open invitation for rainwater, and for chimney swifts looking for a nesting cavity between April and October. We install and replace galvanized and stainless caps, repoint spalled crown mortar, and seal the chase top on prefab units. If your flue has been open to the sky, you’ll usually see the damage inside before you see it outside.

Gas Log Set and Burner Replacement
Older gas log sets in Spring often crack at the ceramic pan or rust out at the burner ports after years of humidity cycling. We carry professional-grade replacements, and we size the set to the firebox rather than selling whatever is on the truck. When we install a new set, we check the flue for proper draft before we leave, because a pretty fire isn’t safe fire if it’s spilling carbon monoxide into the room.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Spring
We work on and install gas fireplaces and venting components from the brands chimney professionals actually specify. That means Olympia Chimney flex liners and caps, Famco venting components, and Copperfield chase covers and terminations. We don’t stock box-store substitutes. When we replace a liner in a Spring home, it’s a system built to handle a gas appliance specifically, not a generic tube that happens to fit. If your existing unit is a Heatilator, Majestic, or another major prefab brand, we service those too. Parts for older units sometimes take a couple of days to source, and we’ll tell you that upfront rather than improvising.
Common Gas Fireplace Repair Problems We See in Spring Homes
- Rusted flue liners on 30 to 50 year old prefab units. Spring’s average annual humidity sits above 75%, and a fireplace that goes unused from March to November is a condensation factory. We routinely find steel liners that have rusted through at the seams, and a camera inspection shows it in minutes.
- Corroded firebox panels and dampers on zero-clearance fireplaces. The factory-built units installed throughout the Champions-area subdivisions and along Cypresswood are well past their rated service life. When the panel rusts through or the damper seizes, burned gas can spill into the living space instead of drafting up the flue.
- Animal blockages from chimney swifts and squirrels. Spring’s unused flues are prime nesting habitat from roughly April through October. We’ve pulled squirrel nests, bird debris, and years of accumulated droppings out of flues that the homeowner was about to light. This is a carbon monoxide risk, not just a bad smell.
- Gas logs venting into an unlined or clay-tile flue that was never sized for the appliance. Builders in the 1970s and 1980s often ran a gas log set into a flue designed for solid wood. The result is condensation, acidic flue gas eating at the masonry, and mortar spalling inside the chase. A visual look from the top won’t catch it. The camera does.
Pricing for Gas Fireplace Repair in Spring, TX
A diagnostic visit with camera inspection in Spring typically runs $95 to $185. Basic repairs, like a replacement thermocouple or a new set of refractory panels, land between $160 and $430. A chimney cap replacement usually runs $140 to $390 depending on the flue size and whether we’re also sealing the crown. A full flex liner replacement for a gas appliance runs $1,400 to $2,800 on average in this market, and we’ll always show you the camera footage before we recommend it. You get a written price before any work starts, and that number doesn’t change. Call (336) 863-3889 for a free estimate, and we’ll give you a real dollar range before we even schedule the visit.
We Also Serve Cities Near Spring
Our Gas Fireplace Repair team covers Spring and the surrounding communities, including Humble, Tomball, Houston, and Conroe. If you’re right on the edge of Spring, near FM 1960 or up toward The Woodlands, give us a call and we’ll confirm coverage. Scheduling and dispatch are coordinated from our Houston office, and crews serve Spring locally.
Serving Spring, TX - Our Local Coverage Area
We’re based in the Spring area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gas Fireplace Repair in Spring
In Spring, the most common reason a gas fireplace won’t stay lit is a failing thermocouple or thermopile, followed closely by a rusted flue that’s robbing the burner of draft. Both problems are made worse by the long humid dormant season our fireplaces sit through every year. A quick diagnostic call gets you an answer and a written price before any repair. Call (336) 863-3889 to schedule.
Yes, and it matters more for gas than most people assume. Gas fireplaces produce acidic flue gas and high humidity in the flue, and in Spring’s climate that combination quietly corrodes liners and mortar even when you only use the fireplace a few nights a year. A Level 2 camera inspection is the only way to know the flue is safe, and you should have one at least once before the next burning season. We’ll show you the footage, and if nothing’s wrong, we’ll tell you that plainly and leave.
Yes, and this is exactly what our camera inspection is for. We run a camera through the firebox and up the full flue length, and we look at the panels, the damper, the liner, and the cap. On a 1980s Heatilator in Spring, we’re specifically checking for panel rust-through, a seized damper, and liner corrosion. If the unit passes, we’ll tell you. If it doesn’t, you’ll see the problem on screen before we quote a dollar amount.
First, know that chimney swifts are federally protected under the Migratory Bird Treaty Act, and it’s illegal to remove an active nest. The right move is to wait until the birds have left, usually by late October in the Spring area, then have a properly fitted cap installed. The best time to schedule that work is late February or early March, before nesting season starts. Call (336) 863-3889 and we’ll get you on the calendar before the swifts settle in.
You’ll know when the camera shows you the rust, the gaps, or the spalled clay tile inside your existing flue. In Spring, we find liner failure on most 30 to 50 year old prefab systems, because the humid dormant season is brutal on thin steel and old mortar. If your gas log set is venting into an unlined clay-tile flue, that’s a legitimate safety issue, not an upsell. We’ll show you the footage and you can decide from there. Estimates are free.
Call Alcott Chimney Sweep for Gas Fireplace Repair in Spring
If your gas fireplace is acting up, or it’s been years since anyone looked inside the flue, don’t wait until the first 40-degree night to find out there’s a problem. Call us at (336) 863-3889 and a live person will answer. We’ll schedule a diagnostic visit, send you the technician’s name and photo before we arrive, and hand you a written price before any work starts. That’s how we’ve done business since 2002, and it’s how we’ll do business at your home in Spring.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep, serving Spring since 2002.





Before
After
Before
After
Before
After