Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Kenmore, WA
Alcott Chimney Sweep handles chimney cleaning, inspection, and gas fireplace repair for homeowners across Kenmore, WA. Most of the chimneys we work on here belong to ranch homes and split-levels built between 1950 and 1975, and after fifty to seventy years of damp Pacific Northwest weather, those original brick stacks are usually ready for more than a quick sweep. The low basin terrain near Lake Washington and the Sammamish River keeps masonry wet longer here than in surrounding hilltop communities, which changes the work. If you need a chimney company that understands older Kenmore houses, call home office line at (336) 863-3889.
Why Kenmore Homes Are Different
Kenmore sits low, tucked between the northern tip of Lake Washington and the Sammamish River corridor. That geography creates a damp, fog-heavy microclimate that lingers around chimneys. Masonry stays saturated through fall and winter, moss and lichen take hold on crowns and shoulders, and mortar joints erode faster than they do in Bothell or higher spots in King County. When we inspect a chimney in Kenmore, we expect to talk about moisture before we talk about soot.
The housing stock compounds it. Most chimneys in Kenmore are original single-wythe brick from the 1950s, 1960s, and early 1970s. The flues inside are often unlined or still carrying original clay tiles cracked by decades of heating-season cycling. Near the Sammamish River floodplain, technicians regularly find moisture weeping at the firebox throat even in July, a sign that groundwater and fog are wicking up through old masonry. That means waterproofing and crown repair are common needs during a standard Kenmore chimney visit, not occasional add-ons. The long October-to-April burn season here also means residents fire up with partially seasoned wood, which produces heavier creosote than drier inland markets see.
Our Main Kenmore Services
Most Kenmore homeowners reach out to us for two things: a thorough sweep before burn season, or an inspection because something looked or smelled wrong during the last fire. Below is how each service works in Kenmore, with links to the full pages.
Chimney Sweep in Kenmore
A sweep in Kenmore usually means removing heavier-than-average creosote, the tar-like buildup that causes chimney fires, because damp storage conditions push many households toward burning wood that never fully seasoned. We also pay close attention to moss on the crown and efflorescence on the brick face, both of which show up faster in this low-basin climate than anywhere else we work. The goal is a flue that draws cleanly before the heating season starts. Full details, including what to expect during the visit and how we protect your floors, are on our dedicated page: Chimney Sweep in Kenmore.
Chimney Inspection in Kenmore
Inspection in Kenmore tends to uncover moisture problems before anything else. Cracked clay tiles, spalled brick, and eroded mortar are common, particularly on homes built before 1975 that have never had a masonry assessment. We use a camera to document what the flue actually looks like inside, and you get a photo report so you can see what we see. Nothing is recommended without visual evidence, and small issues that can safely wait are noted as such. Full scope and the differences between a basic check and a camera inspection are here: Chimney Inspection in Kenmore.
Gas Fireplace Repair in Kenmore
Gas fireplaces in Kenmore tend to fail when their vents or log sets collect moisture-driven corrosion, which is more common near the river basin. We service and repair gas log sets, valves, thermocouples, and venting, and we carry professional trade parts from brands like Olympia Chimney and Famco rather than generic substitutes. If your gas fireplace won’t light, flames look weak or yellow, or there’s a smell after shutoff, this is the service to start with. See what’s covered here: Gas Fireplace Repair in Kenmore.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kenmore
We install and service professional-grade chimney and fireplace materials from HeatShield, Gelco, Olympia Chimney, and Famco. These are the brands chimney professionals specify for liner resurfacing, crown repair, and gas component replacement, and we stock common parts for faster turnaround in Kenmore. Learn more on our brands page.
Pricing for Chimney Company in Kenmore, WA
| Service | Typical range in Kenmore |
|---|---|
| Standard chimney sweep (open masonry fireplace) | $189 – $249 |
| Chimney sweep with heavy creosote buildup | $249 – $329 |
| Chimney sweep for a wood stove flue | $210 – $270 |
| Level 1 chimney inspection | $129 – $189 |
| Level 2 chimney inspection with camera | $249 – $379 |
| Gas fireplace inspection and cleaning | $149 – $199 |
| Gas fireplace repair (diagnostic fee applied to work) | $89 diagnostic, then $150 – $400 typical |
| Chimney crown repair | $450 – $900 |
| Chimney cap supply and install | $150 – $350 |
| Dryer vent cleaning | $99 – $150 |
Price pushes upward in Kenmore when we find moss damage on crowns, spalled brick faces, or clay tiles cracked by moisture cycling, all common in the basin neighborhoods. Every job gets a written price before work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Kenmore
We work throughout Kenmore, from the streets near the Sammamish River up to the higher lots east toward 68th Avenue. We schedule jobs across the city most weekdays, and our Seattle-based dispatch coordinates technician routing so Kenmore appointments stay close to schedule.
- Arrowhead
- Kenmore Terrace
- Moorlands
- Northlake
- Uplake Terrace
Service Area – Cities Near Kenmore
Alcott Chimney Sweep serves Kenmore and the surrounding north King County and south Snohomish County communities. If you’re just outside the Kenmore city line, we also cover Bothell, WA, Mountlake Terrace, WA, Lynnwood, WA, and Woodinville, WA. Same vetting, same written pricing, same guarantee in every one of these cities.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Kenmore
Most Kenmore appointments are scheduled within five to seven business days. Burn-season prep in September and October books out further, so if you want a sweep before the first fire, call earlier in the summer. The phone at (336) 863-3889 is answered by a live person anytime, including evenings.
Some Kenmore neighborhoods have architectural review requirements for visible exterior changes like chimney caps or crown repairs, but a standard sweep or inspection does not require any approval. If your HOA asks for documentation, we can provide a written description of the work. We recommend checking your covenants before any exterior modification, and we’ll work with whatever your association requires.
Yes, we schedule across all of Kenmore, from the Sammamish River basin up through the neighborhoods east of 68th Avenue. The only variation is scheduling, not coverage. If you’re near the Bothell or Lake Forest Park boundary, just let the dispatcher know your cross streets and we’ll confirm the visit time.
If you’re ready to schedule a sweep, inspection, or gas fireplace repair in Kenmore, call (336) 863-3889. You’ll get a live person, a written price before we start, and a technician whose name and photo you’ll know before the door opens. Written by Ruben Castellano, Owner at Alcott Chimney Sweep.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kenmore Customers Say
"Water was leaking around the flashing. They resealed it and installed a new crown coating. Dry through two heavy rains since."
- Douglas P."Fast and tidy. Fireplace draws properly again."
- Mina K."Good chimney cleaning. They found a small gap in the mortar and quoted the repair, which was a bit more than I wanted to spend. Did the sweep and left the repair for later without any pressure."
- Stuart L.