Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Bloomingdale, FL
Alcott Chimney Sweep provides chimney sweeping, inspection, and gas fireplace repair to homeowners throughout Bloomingdale, FL. Most Bloomingdale homes were built in the 1980s and 1990s with builder-grade prefabricated fireplaces that were never meant to handle decades of Florida humidity. That changes what a chimney job looks like here. If you need service, call (336) 863-3889 and you’ll get a live person, not a voicemail.
Why Bloomingdale Homes Are Different
Bloomingdale’s neighborhoods in eastern Hillsborough County were built almost entirely during the 1980s and 1990s suburban tract-home boom. The fireplaces installed in those homes were zero-clearance metal units sold as amenities, not primary heat sources. They sit dormant through ten-plus months of subtropical humidity every year. Moisture works its way past chase covers and flashing, corroding the thin-wall steel flue liners from the inside out. By the time a cold January snap finally prompts a first fire in years, the flue has often deteriorated from moisture and disuse rather than heavy creosote buildup. That is a failure pattern specific to this era of Hillsborough County development, and it drives what our technicians look for when they open a Bloomingdale chimney.
We also regularly find moisture-driven efflorescence on masonry chases and mold colonization inside prefab flue cavities. The summer thunderstorm season from June through September pushes water past compromised caps into firebox interiors that homeowners rarely open to inspect. When we arrive in Bloomingdale, we expect rust, warped firebox panels, and dampers that have seized from corrosion. The good news: these problems are visible with a camera inspection, and homeowners can see the evidence for themselves before approving any work.
Our Main Bloomingdale Services
Bloomingdale homeowners call us most often for two things: a chimney that has not been touched since the house was built, and a gas fireplace that will not light when the family finally wants to use it. Here is what each service involves in Bloomingdale.
Chimney Sweep in Bloomingdale
A sweep in Bloomingdale is rarely about heavy creosote from a winter of fires. It is about clearing out what moisture and disuse leave behind: rust flakes, wildlife nesting material, and the kind of glazed creosote that forms when low-temperature fires smolder in a cold, draft-starved prefab flue. We remove that buildup with rotary and brush systems sized for the thin-wall steel liners common in 1980s and 1990s tract homes. See the full scope on our Chimney Sweep in Bloomingdale page.
Chimney Inspection in Bloomingdale
Bloomingdale’s high humidity means issues hide behind chase covers and inside flue cavities where no one looks. Our inspection uses a camera to document every inch of the flue, from the firebox to the cap. You see the photos. You get a written report. If we find corrosion, cracked panels, or failed dampers, we show you the images before we quote a repair. Bloomingdale’s prefab units were designed with a finite lifespan, and many have quietly passed it. Full details are on our Chimney Inspection in Bloomingdale page.
Gas Fireplace Repair in Bloomingdale
Gas fireplaces in Bloomingdale fail in predictable ways: corroded pilot assemblies from humidity, dirty burners that yellow the flame, and thermocouples or thermopiles that give out after years of sitting unused. We carry professional trade parts from Famco and Copperfield so many repairs happen the same visit. If your gas fireplace will not light or the flame looks weak, see what we cover on our Gas Fireplace Repair in Bloomingdale page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Bloomingdale
We install and service DuraFlex liner systems, HeatShield resurfacing, and parts from Famco and Copperfield. These are the brands chimney professionals specify for Florida’s humidity and heat, not box-store substitutes. See our brands for details on what we carry locally.
Pricing for Chimney Company in Bloomingdale, FL
| Service | Typical range in Bloomingdale |
|---|---|
| Standard chimney sweep | $180 – $340 |
| Level 1 inspection | $150 – $250 |
| Level 2 inspection (camera) | $300 – $500 |
| Gas fireplace cleaning | $100 – $180 |
| Gas log set replacement | $250 – $600 |
| Thermocouple replacement | $150 – $300 |
| Flue cap replacement | $90 – $200 |
| Chase cover replacement | $250 – $500 |
| Glazed creosote chemical treatment | $75 – $200 additional |
Prices in Bloomingdale tend to run higher than average when a chimney has gone years without service and moisture has accelerated corrosion. A prefab flue with a rusted chase cover usually costs more to correct than a straightforward sweep. Every Bloomingdale customer gets a written price before any work begins, so the number you approve is the number you pay.
Neighborhoods We Serve in Bloomingdale
We work throughout Bloomingdale and the surrounding eastern Hillsborough County subdivisions, including many of the 1980s and 1990s planned communities where prefab fireplaces are the norm. Representative neighborhoods we serve:
- Bloomingdale proper and the Bloomingdale area east of Bell Shoals Road
- FishHawk Ranch and newer eastern subdivisions
- Winthrop Village
- Riverview and the Boyette Road corridor
- Lithia and south toward FishHawk Creek
Most Bloomingdale appointments can be scheduled within a few business days. We coordinate dispatch from our Miami office, with local crews serving Bloomingdale directly.
Service Area – Cities Near Bloomingdale
Alcott Chimney Sweep serves Bloomingdale and the surrounding Tampa Bay communities. If you are in Tampa, FL, Orlando, FL, Jacksonville, FL, or Miami, FL, our local crews handle those areas as well. Every visit includes the same identity-verified technician preview and written price before work starts.
Serving Bloomingdale, FL - Our Local Coverage Area
We’re based in the Bloomingdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Bloomingdale
Scheduling in Bloomingdale typically happens within a few business days. We are not an emergency chimney service and do not guarantee same-day arrival. Call (336) 863-3889 and a live person will find the next available appointment that works for you.
Many Bloomingdale subdivisions have HOAs, but chimney sweeping and inspection rarely require architectural approval. Repairs that change exterior appearance, like a chase cover replacement, may fall under HOA rules. Check your HOA covenants before scheduling exterior work. We are happy to provide the spec details your HOA needs.
Before the truck pulls up, you receive the technician’s name and photo by text or email. At your door, they show a photo ID badge. This is the Threshold Standard, and it applies to every Bloomingdale visit without exception. You will always know who is coming before you open the door.
Call (336) 863-3889 for a free estimate. We serve Bloomingdale homeowners with straightforward pricing, written guarantees, and a live person on the phone around the clock.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomingdale Customers Say
"Gas fireplace pilot kept going out. Cleaned the burner, replaced the thermocouple, and explained what failed. Works first try now."
- Alicia R."Cap, screen, and a full inspection with photos sent to my phone. Easy to understand and a fair price."
- Tomas Y."Very respectful of my home. Took off his boots and wiped the hearth when finished."
- Carol D.