Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Galveston
A chimney inspection in Galveston typically runs $189 to $429 for a Level 1 or Level 2 evaluation, with camera-assisted interior scans at the upper end of that range. The island’s salt-laden Gulf air corrodes metal components and breaks down mortar joints far faster than inland climates, which means an inspection here is less about creosote and more about water intrusion, corrosion, and structural wear. Our crews know the older East End brick chimneys and the mid-island post-Ike rebuilds equally well. If you suspect a problem or just want a clear answer on what your chimney actually needs, call (336) 863-3889 and we’ll schedule a time that works for you.
Why Alcott Chimney Sweep Is Galveston’s Preferred Chimney Inspection Company
Galveston homeowners deal with a very specific set of chimney problems, and we’ve spent years learning exactly where they show up first. Salt air eats galvanized caps and dampers. Wind-driven rain works its way behind flashing on exposed gable-end chimneys. Century-old brick in the East End spalls under constant humidity. Our inspectors document all of it with camera footage and photos, so you see exactly what we see before deciding on any repair. That matters, because too many island chimneys were cosmetically patched after Hurricane Ike and never truly checked behind the mortar.
We’re part of the Threshold Group family of home-service companies, and every Alcott technician who arrives at a Galveston home has passed a background check and identity verification before ever stepping on the property. You’ll know the technician’s name and see their photo before we arrive, and they’ll show a photo ID badge at your door. That’s the Threshold Standard, and we applied it long before it became something to advertise.
For scheduling from the Dallas-Fort Worth office, our crews serve Galveston locally, with response times measured in days, not weeks, during inspection season.
Level 2 Chimney Inspection in Galveston
A Level 2 Chimney Inspection in Galveston runs $289 to $429 for a single-flue home and is the inspection we recommend most often on this island, especially for any house that went through Hurricane Ike or has had cosmetic masonry repointing in the last 15 years. This is the only inspection level that uses an interior camera scan of the flue liner, which is the only reliable way to find cracked or missing clay tile sections hidden behind fresh tuck-pointing. If you’re buying a home in Galveston, changing fuel type, or haven’t had the flue interior looked at since before 2008, this is the inspection to request.
We also recommend it after any severe weather event. Galveston’s hurricane season puts repeated wind-driven rain against chimney crowns and flashing, and damage behind the brick doesn’t always show itself on the exterior. A standard visual check can miss what a camera scan catches in minutes.
What the camera scan reveals
Our inspectors run a high-resolution camera up the flue and record the entire length. On Galveston homes, we’re looking for three things most often: liner gaps from post-Ike rebuilds, salt-corrosion rust trails that indicate water has been running down the interior, and wildlife nests that form quickly when a chimney sits unused in a humid climate. Each finding is documented and shown to you on the spot.
When a Level 1 isn’t enough
A Level 1 inspection is visual only and works fine for homes with a known maintenance history and no changes to the system. But most Galveston chimneys we see were built before modern liner standards or repaired quickly after 2008. If you’re unsure when the flue was last looked at internally, stepping up to a Level 2 is cheaper than discovering a cracked liner through water damage or a chimney fire.
Chimney Leak in Galveston
A Chimney Leak in Galveston is best addressed with a thorough leak-trace inspection, which runs $249 to $389 depending on whether we’re working on a single-story mid-island ranch or a three-story Victorian in the East End. Salt air and wind-driven rain mean leaks here aren’t a seasonal nuisance; they’re a year-round structural pressure. We find most island leaks start at the cap, the flashing, or the crown, and identifying which one failed is the first job before any repair is priced.
Common leak entry points on island homes
Galvanized caps that rust through in under five years are a frequent sight on Galveston chimneys. When the cap fails, rain falls directly into the flue, soaking the smoke chamber and eroding the mortar from the inside. Flashing that’s pulled away from the brick, especially on windward-facing chimneys, sends water behind the siding and into the ceiling. Cracked crowns on older masonry chimneys let water seep into the brick itself, which accelerates spalling and efflorescence.
How we pinpoint the source
We don’t guess at leaks. Our techs run a water test where applicable and trace staining patterns, then back up findings with camera footage of the flue interior. That gives you a clear, visual explanation of where water is entering and what the repair will involve. If we find that the liner behind fresh mortar is cracked or missing, you’ll see it on camera before you spend a dollar on repair.
Trusted Brands We Service in Galveston
We install and service chimney components from the brands professionals specify, not box-store substitutes. For Galveston’s salt exposure, we use stainless steel components from Olympia Chimney and Famco because stainless holds up where galvanized fails quickly. When flue liners need resurfacing, we use HeatShield’s cerfractory product, which seals cracked clay tile liners without a full rebuild. We keep common replacement parts stocked for fast turnaround on island homes, so you’re not waiting weeks for a cap or damper that rusted out during the winter.
Common Chimney Inspection Problems We See in Galveston Homes
- Salt-corroded galvanized caps and dampers. The same cap that lasts 15 years in Houston may last 4 or 5 on the island. We find rusted-through caps and seized dampers constantly on Galveston chimneys, even on homes that are otherwise well-maintained.
- Spalled brick and crumbling mortar on historic chimneys. The East End Historic District’s 1880s to 1910s brick chimneys are especially vulnerable. Year-round humidity plus salt penetration causes brick faces to flake off and mortar joints to soften well before the rest of the structure shows age.
- Hidden liner damage behind post-Ike cosmetic repairs. After 2008, many mid-island and west-end chimneys got fresh tuck-pointing that made them look sound while the flue liner inside was still cracked or missing sections. A camera scan is the only way to find this.
- Efflorescence and biological growth. White mineral staining and green moss or mold on chimney brick are signs that water is moving through the masonry. On Galveston, that’s nearly always tied to salt-laden moisture evaporating through the brick face, carrying minerals with it.
Pricing for Chimney Inspection in Galveston, TX
A Level 1 visual inspection in Galveston runs $189 to $259 for a single-flue residential chimney. A Level 2 camera inspection runs $289 to $429, and the price difference reflects the camera equipment, the time it takes to scan and interpret each flue, and whether access requires equipment like a taller ladder for a three-story Victorian. Level 3 inspections, which involve removing portions of the structure to access hidden areas, are quoted individually after the Level 2 findings are reviewed. Multi-flue homes, common in the East End, add $75 to $110 per additional flue. Every inspection includes a written report with photos and a clear explanation of what we found, what needs action now, and what can safely wait. Call (336) 863-3889 for a firm quote before we arrive.
We Also Serve Cities Near Galveston
Our Chimney Inspection team works across Galveston County and the surrounding area, including Texas City, La Marque, Hitchcock, and Dickinson. If you’re just off the island or across the causeway, we can usually schedule you within the same week as our Galveston routes. Call us and we’ll find the soonest slot that works for your schedule.
Serving Galveston, TX - Our Local Coverage Area
We’re based in the Galveston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Galveston
Annual inspection is the right interval on Galveston even if you light a fire twice a year, because the threats here are corrosion and water intrusion, not creosote. Salt air is working on your cap, damper, and flashing every single day regardless of use. A yearly corrosion and water-intrusion check catches a rusting cap before it becomes a leak, and it’s far cheaper than repairing water damage inside your walls. Call (336) 863-3889 to schedule and we’ll put you on an annual reminder cycle if that’s helpful.
A Level 2 inspection adds a camera scan of the flue interior, which shows you the liner condition in real time. A Level 1 is visual only and can’t see cracks, gaps, or missing tile sections behind the masonry. On Galveston, where post-Ike repairs often hid liner damage behind new mortar, that camera scan is the difference between catching a problem early and finding it through a chimney fire or water leak. We document everything and show you the footage before recommending any repair.
Yes, unfortunately. Galvanized steel caps and dampers corrode at an accelerated rate in Galveston’s salt air, and a cap that would last over a decade in Houston can fail in four or five years on the island. We replace them with stainless steel models from Olympia Chimney or Famco, which hold up far better against salt exposure. If you’re tired of replacing caps every few years, upgrading to stainless costs more up front but usually ends the cycle for good.
The white staining is efflorescence, which occurs when salt-laden moisture moves through the brick and evaporates at the surface, leaving mineral deposits behind. The green growth is mold or moss feeding on constant humidity. Both are signs that water is moving through your chimney masonry, and neither should be ignored. Treating the stain without fixing the water entry point just means the staining returns next season. An inspection pinpoints where the water is getting in and what it will take to stop it.
Definitely. Many post-Ike repairs were cosmetic tuck-pointing that made chimneys look solid while leaving the interior flue liner cracked or missing behind the fresh mortar. A Level 2 camera inspection is the only way to confirm whether the liner is actually intact. We’ve found liner gaps behind beautifully repointed brick on more than one mid-island home. If your chimney was patched after 2008 and never camera-scanned, it’s time to look behind the mortar.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep, serving Galveston homeowners with straight answers and camera-verified inspections.





Before
After
Before
After
Before
After