Chimney Inspection in Revere, MA | Alcott Chimney Sweep

Chimney Inspection in Revere - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

1851+
Cities Served
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Fast, Reliable Chimney Inspection Across Revere

A chimney inspection in Revere typically costs $149 – $389 for a Level 1 visual check and $249 – $549 for a Level 2 camera inspection, depending on the number of flues and roof access. Most Revere homes we inspect take 45 – 90 minutes, and the report is usually in your hands before we leave the driveway. If you’re in a triple-decker off Shirley Avenue or a two-family near Brown Circle, call (336) 863-3889 and we’ll tell you exactly what your stack needs. We’ve worked Revere’s chimneys long enough to know that a single exterior brick stack here often venting three separate households is its own kind of inspection.

Call (336) 863-3889

Why Alcott Chimney Sweep Is Revere’s Preferred Chimney Inspection Company

Revere isn’t a simple single-family suburb. The housing stock is dense, old, and built around shared masonry stacks that were never designed for today’s appliance loads. Ruben Castellano built Alcott Chimney Sweep to handle exactly this: inspections that account for every flue in the stack, not just the one that called us. When we send a technician to Beachmont, Point of Pines, or the streets running off Broadway, that technician has already been background-checked and identity-verified under the Threshold Standard. You get the tech’s name and photo before the truck rolls.

We carry professional trade materials built for coastal New England masonry: DuraFlex and HeatShield liners, Famco caps, and Copperfield dampers. Nothing improvised, nothing from a big-box shelf. A Chimney Inspection from our team is documented with camera imaging when the job calls for it, and every finding is explained in plain English before you sign anything. That’s been the approach since 2002.

Chimney Inspection Services in Revere

Chimney Inspection Services in Revere start with the question most companies never ask: how many appliances actually vent into this stack? On a triple-decker, the answer is rarely one. Our Level 1 inspection runs $149 – $249 and covers the accessible portions of the flue, damper, and firebox, plus a check of the exterior stack from the ground. It fits annual maintenance on a single-family or a two-family where nothing has changed.

Level 2 Camera Inspection

A Level 2 runs $249 – $549 in Revere and adds a full-length camera scan of every flue in the stack, the chimney crown, and the smoke chamber. This is what we recommend when a property changes hands, after a chimney fire, or when a neighbor’s appliance shares your stack and you want documentation of what’s actually inside. The camera doesn’t guess.

Level 2 Camera Inspection

Real Estate Inspection Support

Buying a two-family off Revere Street or a triple-decker near the beach? Sellers won’t volunteer that the second-floor water heater flue is offset. Our camera inspection gives you a written record you can take to closing. Cost runs $299 – $489 for a full multi-flue Level 2.

Real Estate Inspection Support
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (336) 863-3889

What happens when you call

  1. 1
    A real person answersNo phone trees - you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Chimney Flue Inspection in Revere

A Chimney Flue Inspection in Revere is the only reliable way to know whether the clay tile liner inside your shared stack is still doing its job. Salt air off Revere Beach eats mortar from the outside, but the cracks that matter most are inside, invisible from the roof. We scope each flue with a camera and report exactly what we see: offset tiles, gaps, creosote loading, or a neighbor’s flue tied into yours.

Flue Condition and CO Risk

In Revere’s older triple-deckers, a cracked liner in one unit’s flue can push carbon monoxide into a different unit. That’s not hypothetical; we’ve documented it. When you call us for an inspection, we treat the whole stack as one system and every flue as connected.

Top-Down Flue Scan

Tight lots and old triple-decker roofs mean some companies skip the top-down scan and call it a ground look. We don’t. Our techs access the roof when it’s safe and run the camera from the crown down to the appliance connection. That’s where offset tiles hide.

Trusted Brands We Service in Revere

We service and install what the trade actually specifies, not what the hardware store had on sale. DuraFlex liner systems, HeatShield resurfacing, Famco caps and dampers, and Copperfield dampers are the materials we stock for Revere jobs. Local inventory means faster turnaround when a two-family needs a liner repair before the next freeze-thaw cycle. Ruben Castellano’s rule is simple: if we wouldn’t put it on our own mother’s chimney, it doesn’t go on yours.

Common Chimney Inspection Problems We See in Revere Homes

  • Shared stack, unscoped neighbor flues: An inspection limited to the unit that called leaves two other flues undocumented. If the third-floor fireplace flue is tied into the second-floor water heater flue above the smoke chamber, CO has a path into a living space, and the only way to find it is a full-stack camera pass.
  • Salt-driven mortar loss and crown cracking: The Atlantic frontage means Revere chimneys get hit with airborne salt that most Greater Boston towns never see. Mortar joints erode faster, and once the crown cracks, water gets behind the brick and begins spalling faces within a few winters.
  • Offset clay tiles from 80-year-old stacks: The original clay liners in Revere’s 1900 – 1940 housing stock are often cracked or offset. You can’t see it from the ground, and a ground-level look misses it entirely. It takes a camera in the flue.
  • Roof access skipped on tight triple-decker blocks: Streets like those off Shirley Avenue have steep, tight roofs that some techs won’t climb. We will when conditions allow, because the top-down scan is where our tech found the water heater flue tied into the fireplace flue up the stack.

Pricing for Chimney Inspection in Revere, MA

A standard Level 1 chimney inspection in Revere runs $149 – $249 for most homes. A Level 2 with camera documentation runs $249 – $549, and a multi-flue triple-decker Level 2 typically lands $299 – $489 depending on the number of flues and roof access. What moves the number? Number of flues in the stack, roof steepness, and whether we’re scoping for a real estate sale. Every inspection gets a written price before we start, and every repair we recommend gets its own written estimate with a written guarantee. Call (336) 863-3889 for an exact quote; estimates are free.

We Also Serve Cities Near Revere

Our crews handle Chimney Inspection in Revere and neighboring communities including Chelsea, Everett, Malden, and Saugus. If you’re in one of those cities and dealing with a shared stack or a salt-damaged crown, the same background-checked technicians and the same camera documentation apply. Call (336) 863-3889 and we’ll route the nearest verified tech to you.

Serving Revere, MA - Our Local Coverage Area

We’re based in the Revere area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs About Chimney Inspection in Revere

Why Revere Chooses Alcott Chimney Sweep

We set the standard for chimney inspection in Revere.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Revere

Getting your chimney inspection handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney inspection needs and we provide an upfront, transparent quote - no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Revere - typically within 30-60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees - talk to a local chimney inspection pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Revere Customers Say

Trusted by homeowners across Revere and surrounding areas.

★★★★★

"Left no soot anywhere. Even brought a vacuum with a sealed filter. I'd use them again every fall."

Beth H. · Verified customer
★★★★★

"Gas fireplace pilot kept going out. Cleaned the burner, replaced the thermocouple, and explained what failed. Works first try now."

Alicia R. · Verified customer
★★★★★

"Cap, screen, and a full inspection with photos sent to my phone. Easy to understand and a fair price."

Tomas Y. · Verified customer

Current Offers

Bring these savings to your next appointment.

Photo Report Included With Every Sweep

You see what we see before anything is recommended.

Expires Mar 31, 2027
Always

Written Price Before Any Work Starts

Expires Mar 31, 2027
Included

Written Guarantee on Every Repair

Expires Mar 31, 2027
Free

Free Second Visit if the Repair Fails

Expires Mar 31, 2027

Ready for Chimney Inspection in Revere?

Call now for a free estimate - or request one below. Licensed, insured, and here with fast after-hours help in Revere.

(336) 863-3889

Request a Free Estimate in Revere

Tell us about your chimney inspection needs - we'll respond within the hour.

By clicking submit, you confirm you have read our Privacy Policy and agree to be contacted by call, text, or email concerning your request, including by the partner businesses that may perform the service.

Areas We Serve
Call Now - 24/7 Dispatch