Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Lansdale
A chimney sweep in Lansdale, PA typically costs between $189 and $329 for a standard open fireplace, with creosote removal, soot removal, and a Level 1 inspection included. Most homes in the borough’s older core take us about 60 to 90 minutes, and we work across every neighborhood from the blocks around the SEPTA station out to the Montgomeryville border. If you think your chimney hasn’t been swept in years, or you just bought a twin on West Main Street and don’t know the flue’s history, call us at (336) 863-3889. Our Chimney Sweep team knows Lansdale’s older housing stock intimately, and we’ll tell you honestly what your chimney needs and what it doesn’t.
Why Alcott Chimney Sweep Is Lansdale’s Preferred Chimney Sweep Company
Lansdale homeowners deal with something most suburban towns don’t: chimneys built for coal in the 1880s through 1920s, still holding oversized clay flue tiles that were never relined after the borough switched to oil and gas heat. That’s not a footnote. It changes what a proper sweep and inspection must catch. Our technicians know the difference between a crown that just needs sealing and a flue that’s actively dumping carbon monoxide into a bedroom wall, and we show you the camera footage either way. We serve Chimney Sweep in Lansdale with crews that understand freeze-thaw damage patterns on exposed brick stacks and the shared-flue retrofits common near the rail corridor.
Every technician who comes to your door in Lansdale has passed a background check and identity verification under the Threshold Standard. Before we arrive, you get their name and photo. They’ll show a photo ID badge at the door, every time, no exceptions. Ruben Castellano set this company up in 2002 so that homeowners would never have to wonder who they just let into their house. That’s the way we still run it.
You also get a written price before any work starts. Always included, never negotiable. And every repair comes with a written 365-day guarantee. If a repair fails within that year, the second visit is free. That’s the Done Right Promise, and it applies to every Lansdale job we complete.
Gas Fireplace Cleaning in Lansdale
Gas Fireplace Cleaning in Lansdale runs $149 to $249 and includes removing the glass, cleaning the burner and pilot assembly, checking for soot buildup on fake logs, and verifying the venting is drafting properly. We see a lot of gas fireplaces in Lansdale’s 1980s-era homes east of Broad Street and in the townhome clusters near Whites Road Park, and the problems are consistent: dust-caked burners, obstructed pilot tubes, and owners who haven’t had the unit touched in five years because “it still lights.”
What the service includes
We pull the logs, vacuum the firebox, clean the burner ports, and check the thermocouple and thermopile with a multimeter. If the glass has a milky film we can’t remove, we tell you before ordering a replacement. We also verify the termination cap outside isn’t blocked by a bird nest or squirrel debris, which is common on Lansdale side-wall vents.
When Lansdale homeowners should book it
If you notice the flames burning mostly yellow or orange instead of crisp blue, or you smell a faint gas odor when the unit first ignites, that’s a sign the burner needs cleaning or the venting is restricted. Annual cleaning is the safe interval, especially if your fireplace is in a finished basement on the west side of town where humidity runs higher and dust accumulates faster.
Chimney Maintenance in Lansdale
Chimney Maintenance in Lansdale is where we catch the problems that turn into four-figure repairs. A maintenance visit costs $189 to $289 and includes a visual inspection of the crown, flashing, mortar joints, rain cap, and damper, plus removal of any surface creosote or soot present. In Lansdale’s freeze-thaw climate, a crown with hairline cracks in October can be a spalling brick face by March, so we recommend a maintenance check every fall before burning season starts.
Crown and flashing checks
The crown is the concrete cap on top of the chimney. On Lansdale’s older homes, we frequently find crowns that were originally poured too thin or never sealed with a proper flexible sealant. Water gets in, freezes, and pops the top courses of brick. Flashing rusts where it meets the roof, especially on the steep rooflines of the Victorians near Main Street, and that’s where interior water stains on ceiling plaster usually start.
Chimney cap and damper service
A missing or damaged rain cap on a Lansdale chimney invites rain, squirrels, and birds into a flue that may already have cracked clay tiles. We stock caps from Famco and Copperfield, and can install one the same day if conditions allow. We also check that the throat damper actually seals; a warped damper on a coal-era chimney lets warm air escape all winter and pulls cold downdrafts into the living room on windy nights.
Trusted Brands We Service in Lansdale
We carry and install materials from the brands chimney professionals specify, not what happens to be on a big-box shelf. That means DuraFlex liner systems for relining Lansdale’s coal-era flues, HeatShield resurfacing for clay tile repair without a full rebuild, and Famco or Copperfield caps and dampers. Because we stock these for Lansdale jobs, turnaround on common repairs is fast, often the same week. We’d rather put the right material on your chimney once than a substitute on it twice.
Common Chimney Sweep Problems We See in Lansdale Homes
- Shared unlined flues near the SEPTA station: A fireplace and a converted oil or gas furnace venting into a single clay tile flue. This violates NFPA 211 and creates a carbon monoxide pathway that homeowners rarely know exists until we put a camera up the stack.
- Freeze-thaw crown and mortar damage: Montgomery County winters swing above and below freezing multiple times a week from November through March. On Lansdale’s exposed brick chimneys, that repeated cycle erodes mortar joints and cracks crowns faster than in the newer subdivisions to the east.
- Mid-century tee fittings on oil furnaces: In the 1940s – 1960s infill homes around Whites Road and East Main Street, oil furnaces were often tied into existing masonry chimneys with makeshift tee connections instead of proper liners. The result is condensation, acidic soot, and flue tile deterioration.
- Third-degree creosote in never-swept coal flues: Oversized clay tiles from the coal era run cooler than modern liners, so creosote condenses faster and bakes into a hard, glazed layer that a standard brush won’t remove. This is the form of creosote that fuels chimney fires.
Pricing for Chimney Sweep in Lansdale, PA
A standard chimney sweep in Lansdale runs $189 to $329 for an open fireplace, including a Level 1 inspection. Gas fireplace cleaning runs $149 to $249. Level 2 inspections, which we recommend for any home in Lansdale built before WWII or with a history of fuel conversions, cost $249 to $399 depending on home size and the number of flues. Creosote removal for third-degree glazed buildup adds $75 to $180 when chemical or rotary treatment is required. Soot removal is included in the sweep price. Every quote is written before work begins, and there are no surprise charges at the end. Call (336) 863-3889 for a free estimate.
We Also Serve Cities Near Lansdale
Beyond Lansdale, we cover North Wales, Kulpsville, Hatfield, and Montgomeryville with the same written pricing, the same background-checked technicians, and the same 365-day guarantee. If you’re a few blocks over the borough line, call (336) 863-3889 and we’ll confirm coverage for your street.
Serving Lansdale, PA - Our Local Coverage Area
We’re based in the Lansdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Lansdale
Not necessarily. Many original clay flue tiles in Lansdale’s twins are oversized and cracked, but that doesn’t always mean a full reline. We run a camera up the flue first and show you exactly what we see. If the tiles are cracked enough to expose the masonry behind them, or if a furnace is venting into a flue it was never designed for, then yes, a liner is the safe fix. We use HeatShield resurfacing when possible, which costs less than a full stainless rebuild. Call (336) 863-3889 and we’ll give you an honest read based on your chimney’s actual condition, not a generic sales script.
No. NFPA 211 prohibits a fireplace and a heating appliance from venting into the same flue, even though many Lansdale homes have had exactly that configuration since mid-century conversions. If your chimney has one flue serving both, the fireplace smoke and the furnace exhaust are competing for the same passage, which can push carbon monoxide back into the house. We find this pattern regularly in the blocks near the SEPTA station, and it’s one of the reasons a Level 2 camera inspection matters on older Lansdale homes. Call (336) 863-3889 to schedule one before burning season.
Annually, even if you only light a fire twice a year. Lansdale’s freeze-thaw cycling works on your chimney regardless of whether you burn. Crown cracks grow, flashing loosens, and water gets into clay tiles whether there’s smoke in the flue or not. A once-a-year maintenance visit catches those problems while they’re still cheap to fix.
Third-degree creosote is a hard, glazed, tar-like layer that forms when creosote condenses, bakes, and solidifies inside a flue. It’s the form of creosote most likely to ignite into a chimney fire, and Lansdale’s oversized coal-era clay tiles run cool enough to produce it faster than modern liners. A standard brush sweep won’t remove third-degree creosote; it takes chemical treatment or rotary chains. That’s why we inspect for it during every Lansdale sweep and show you the camera image before recommending treatment.
No. Every repair recommendation we make in Lansdale is backed by camera evidence we show you on the spot. If a contractor quotes a full liner or rebuild without running a camera first, walk away. We’ve watched homeowners in Lansdale get quoted $6,000 rebuilds for chimneys that only needed a sweep and a crown seal. Our rule is simple: if we can’t show you the problem, we don’t ask you to pay for the fix. Call (336) 863-3889 and we’ll document your chimney’s condition before we talk price.
If you live in Lansdale and you’re not sure when your chimney was last swept, or you just bought a house near the train station and the flue history is a mystery, call us at (336) 863-3889. We’ll schedule a sweep and inspection, send you the technician’s name and photo before we arrive, and put a written price in your hand before any work starts.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep, serving Lansdale since 2002.





Before
After
Before
After
Before
After