Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Cloverleaf, TX
Chimney work in Cloverleaf isn’t the same as chimney work across the Houston metro. The homes here were mostly built in the 1950s and 1960s, the chimneys predate modern liner codes, and the air itself carries industrial fallout from the Ship Channel corridor. That combination means a Cloverleaf chimney ages differently, and it needs a company that knows what to look for before small problems get expensive. Alcott Chimney Sweep sends background-checked, identity-verified technicians, always with a written price before work begins. Call (336) 863-3889 any time.
Why Cloverleaf Homes Are Different
Cloverleaf sits directly downwind of the Houston Ship Channel’s petrochemical and refinery corridor, so chimneys here take on elevated sulfur dioxide, particulate acids, and industrial off-gassing year-round. Add Harris County’s persistent Gulf Coast humidity, and you get mortar joint decay and flashing corrosion that moves noticeably faster than in Houston’s western or northern suburbs. Most of Cloverleaf’s chimneys were built in the 1950s through 1970s, which means clay tile flues without modern stainless liners. By the time a homeowner sees staining on the brick or smells something musty in the firebox, the structural deterioration has usually been underway for years.
There’s another Cloverleaf wrinkle. Because this is unincorporated Harris County rather than Houston proper, chimney work here spent decades under much looser oversight. A lot of 1960s and 70s fireplaces were retrofitted with gas log sets or had dampers modified with no inspection at all. That leaves a meaningful share of local chimneys with liner conditions nobody ever certified. We flag these on every inspection, because a gas appliance venting into an uncertified flue is a carbon monoxide conversation you want to have on your own terms, not during an emergency.
Our Main Cloverleaf Services
The two jobs Cloverleaf homeowners call about most are chimney sweeping and chimney inspection, with gas fireplace repair close behind as winter approaches. Here’s how each one works in this part of Harris County.
Chimney Sweep in Cloverleaf
A sweep in Cloverleaf is rarely just about soot. Because our fireplaces sit idle for long stretches between uses, we’re usually clearing out raccoon or bird nesting, damp creosote that hardened over last season, and brick spall dust from moisture-driven decay. We run brushes through the full flue length, remove what comes down, and check the accessible mortar and flashing while we’re there. The goal is a flue that actually drafts, not one that just looks cleaner. Read the full breakdown on our Chimney Sweep in Cloverleaf page, including pricing and what to expect on the day of the job.
Chimney Inspection in Cloverleaf
Given how many Cloverleaf chimneys carry uncertified liner histories, an inspection here is a working session, not a formality. We camera the flue interior, check the firebox, damper, crown, and exterior masonry, and we photograph what we find so you can see it for yourself. If a fireplace was retrofitted with gas logs decades ago and never re-inspected, the liner condition is the first thing we document. A written report follows the visit, with photos and plain-English notes. Details at Chimney Inspection in Cloverleaf.
Gas Fireplace Repair in Cloverleaf
Gas fireplaces in Cloverleaf tend to be retrofits installed into original wood-burning boxes. The common failures we see are pilot assemblies, thermocouples, and gas valves corroded by humid Gulf air, plus log sets that were never properly matched to the flue they vent into. We service the brands we install as well as most major manufacturers, and every repair gets a written guarantee. If it fails within the coverage period, the second visit is free. That’s the Gas Fireplace Repair in Cloverleaf promise in one line.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cloverleaf
We work with professional trade materials, not box-store substitutes. That includes Olympia Chimney caps and dampers, HeatShield resurfacing systems, and Famco and Copperfield components. Parts for common Cloverleaf repairs are stocked in our local service vehicles, which keeps most jobs moving same-visit. See our brands for the full list.
Pricing for Chimney Company in Cloverleaf, TX
| Service | Typical range in Cloverleaf |
|---|---|
| Chimney sweep (standard, one flue) | $180 – $340 |
| Chimney sweep (heavy creosote or nesting) | $260 – $420 |
| Chimney inspection (Level 1) | $150 – $250 |
| Chimney inspection with camera (Level 2) | $350 – $550 |
| Gas fireplace service call | $130 – $220 |
| Pilot assembly replacement | $180 – $320 |
| Thermocouple replacement | $140 – $240 |
| Gas valve replacement | $300 – $600 |
| Flue cap installation | $150 – $350 |
| HeatShield resurfacing (per section) | $400+ |
What pushes pricing up in Cloverleaf is usually the same thing: decades of deferred maintenance. A chimney that’s never been swept carries heavier creosote, and humid air corrodes gas components faster. The number we quote is the number on your written price before any work starts, no surprises at the end.
Neighborhoods We Serve in Cloverleaf
We cover the full Cloverleaf area, including the older ranch-style blocks built for Ship Channel workers and the bungalow streets where pier-and-beam foundations shift just enough to stress chimney masonry. Our technicians know the local roads and the typical house layouts.
- Cloverleaf proper
- Greenway Park
- East Houston
- Jacinto City border
- Channelview boundary
Most Cloverleaf appointments are reached within the same week, and we’ll give you the technician’s name and photo before we arrive.
Service Area – Cities Near Cloverleaf
For homeowners just outside Cloverleaf, we also serve Houston, TX and Fort Worth, TX. If you’re near San Antonio, FL or Dallas, GA, our teams cover those areas as well. Each location gets the same Threshold Standard vetting and written-price promise.
Serving Cloverleaf, TX - Our Local Coverage Area
We’re based in the Cloverleaf area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Cloverleaf
Most Cloverleaf appointments are scheduled within the same week, and we book around your availability, not ours. Before the visit, you’ll receive the technician’s name and photo, and they’ll show a photo ID badge when they arrive. Call (336) 863-3889 to schedule.
Cloverleaf is unincorporated Harris County, so permit rules are looser than inside Houston city limits. Most sweeps and inspections need no permit at all. For structural repairs or liner replacements, we’ll tell you upfront what county code requires and handle the paperwork if needed.
Yes, and we see those often in Cloverleaf. Many 1960s and 70s fireplaces got gas log retrofits with no inspection. We camera the flue, document the liner condition, and give you photos. If it’s safe, we’ll say so in writing. If it’s not, you’ll see exactly why on the images.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cloverleaf Customers Say
"Very respectful of my home. Took off his boots and wiped the hearth when finished."
- Carol D."Annual inspection and sweep. He used a camera to check the liner and found a cracked tile I had no idea about. Gave me a written estimate and did not push."
- Janet W."Water was leaking around the flashing. They resealed it and installed a new crown coating. Dry through two heavy rains since."
- Douglas P.