Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Los Angeles?
Most fireplace services in Los Angeles run between $150 and $450 for routine work like a chimney sweep or a gas fireplace tune-up, while bigger jobs such as a chimney relining or masonry repair climb into the $1,800 to $6,500 range. A chimney inspection alone is often $125 to $350, and many homeowners bundle it with a sweep for less than the two services cost separately. If you just need a straight answer before you pick up the phone: budget $200 to $400 for a standard annual visit, and know that anything structural will cost more.
We’re Alcott Chimney Sweep, and we’ve been serving Los Angeles homeowners as part of the Threshold Group family since 2002. Every job starts with a written price you see before we touch anything, so the number you’re quoted is the number you pay. No surprise charges tacked on at the end.
Key Takeaways
- A standard chimney sweep in Los Angeles typically costs $150 to $350 before any repairs.
- Chimney inspections range from $125 for a basic visual check to $350 for a full camera-assisted evaluation.
- Gas fireplace repair usually lands between $180 and $600 depending on the component.
- Relining with a DuraFlex stainless system is the biggest single line item, often $2,500 to $6,500.
- You’ll always get a written price before work begins, plus a written guarantee on every repair.
Fireplace Services Cost Breakdown (2026)
Here’s what the numbers actually look like in the Los Angeles market as of 2026. These ranges reflect real jobs across the city, from older Craftsman homes near Highland Park to newer builds out in the Valley.
| Service | Typical Price Range | Notes |
|---|---|---|
| Chimney sweep (wood-burning) | $150 – $350 | Includes creosote removal and basic safety check |
| Gas fireplace cleaning & tune-up | $175 – $325 | Burner cleaning, pilot check, vent inspection |
| Basic chimney inspection (Level 1) | $125 – $200 | Visual check of accessible areas |
| Full inspection (Level 2, camera-assisted) | $250 – $350 | Required for home sales and after chimney fires |
| Gas fireplace repair | $180 – $600 | Thermocouple, ignition, valve, or remote issues |
| Chimney cap installation | $200 – $550 | Stainless or copper, sized to your flue |
| Crown repair or rebuild | $350 – $1,200 | Depends on crack extent and access |
| Chimney relining (DuraFlex stainless) | $2,500 – $6,500 | Full-length liner, insulation, and termination |
| Masonry repair (tuckpointing) | $500 – $3,000 | Priced per square foot of repointing |
| HeatShield flue resurfacing | $1,800 – $4,000 | Alternative to full relining for some flues |
| Firebox rebuild | $1,500 – $4,500 | Brick and mortar restoration |
| Smoke chamber repair | $800 – $2,500 | Parging or rebuilding the damper area |
What pushes a job toward the top of a range? Height and access are the big ones. A single-story home in Compton with a straight-shot flue takes far less time than a three-story hillside house in Silver Lake where we’re roping equipment up a steep grade. The type of liner you need matters too, and so does whether we’re working with DuraFlex, Olympia Chimney, or a HeatShield resurfacing approach. Materials from these professional-grade brands cost more than box-store substitutes, but they’re what the trade actually specifies because they hold up to heat cycling and creosote over the long run.
Age of the home plays a role as well. Los Angeles has a deep stock of pre-1950 houses, and plenty of them have original clay tile flues that have cracked or shifted after decades of settling and seismic movement. Once a flue liner cracks, it can’t just be patched with mortar and forgotten. That’s when relining or resurfacing enters the picture, and it’s usually the single biggest cost a homeowner faces.
What Affects Fireplace Services Pricing in Los Angeles
A handful of local factors move the price more than anything else. Understanding them helps you read a quote and know whether it’s fair.
- Roof height and pitch. A flat-roof mid-century home in the Valley is a quick job. A steep, tall roof in the Hollywood Hills with limited staging space adds labor and safety time, often a few hundred dollars.
- Flue condition and creosote level. Light, powdery creosote sweeps out fast. Glazed, tar-like creosote – the kind that causes chimney fires – takes longer and may require chemical treatment before a sweep can even be completed.
- Liner type and material. A full DuraFlex stainless liner sized to your flue sits at the higher end, but it’s rated for the long haul. HeatShield resurfacing can cost less when the existing flue is still structurally sound enough to coat.
- Access and parking. Dense neighborhoods like Koreatown or parts of Santa Monica mean tight driveways and street parking, which can add a little setup time.
- Whether it’s an emergency. A same-day call after you smell smoke at 11 p.m. is priced differently than a scheduled annual sweep. We answer the phone around the clock with a live person, and we’ll tell you straight whether it can wait until morning.
- Number of fireplaces or flues. Homes with two fireplaces or a furnace flue in addition to the main chimney take more time, and each additional flue adds to the total.
One more local factor worth naming: earthquake activity. Los Angeles sits in a seismically active region, and repeated small shifts can crack mortar joints and chimney crowns over time. We regularly see hairline crown cracks in older homes that started small and widened after a series of tremors. Catching those early is a $350 to $1,200 repair. Ignoring them until water gets in and the flue degrades can turn into a HeatShield resurfacing or full reline job costing several thousand.
How Alcott Prices the Work
We don’t do “it depends” without a number. When you call, you’ll get a written price before any work starts. That price covers the labor, the materials from brands like Gelco, Famco, and Copperfield where relevant, and the cleanup. If we open something up and find a bigger problem than expected, we stop, show you what we found, and give you a revised written price before continuing. You decide from there.
Every repair we complete comes with a written guarantee. If the repair fails within the coverage period, the second visit is free. On top of that, our 365-Day Done Right Promise means a full year of accountability on the job. That’s not a marketing line – it’s written into the paperwork, and it’s included at no extra charge.
We also work hard on the part most homeowners don’t think about until the doorbell rings: who’s actually coming. Every technician passes a background check and identity verification before stepping onto your property. We call that the Threshold Standard, and it’s not an optional upgrade. You’ll know your technician’s name and see their photo before we arrive, and they’ll show a photo ID badge at the door. Every time. For anyone home alone, or a parent with young kids, or an older homeowner who wants to know exactly who’s on the porch, that matters as much as the price.
How to Save on Fireplace Services
You don’t have to pay top-of-range for good work. A few moves keep your costs down without cutting corners.
- Book your sweep in the off-season. Spring and early summer are slower for chimney work in Los Angeles, and scheduling then often means better availability and occasionally a better rate than the fall rush.
- Bundle inspection with your sweep. Combining a Level 1 inspection and a sweep usually costs less than booking them as two separate visits.
- Handle small repairs before they grow. A $350 crown repair today can prevent a $4,000 reline three years from now. Water damage and cracked flues compound.
- Ask about HeatShield vs. full relining. If your flue is still sound but pitted, resurfacing can cost less than a full liner. We’ll tell you honestly which one your flue actually needs.
- Get the written price up front. A quote that changes at the end of the job isn’t a real quote. Ours doesn’t.
Free estimates are standard with us – call (336) 863-3889 and we’ll give you a real range before anyone comes out. You can also read more about our Fireplace Services in Los Angeles to see the full scope of what we handle.
Fireplace Services Cost by Type
Different services carry very different price tags, so it helps to know which category your issue falls into.
Chimney Sweeping
A standard sweep runs $150 to $350 in Los Angeles. That covers creosote removal – creosote is the tar-like buildup that causes chimney fires – plus a check of the firebox, damper, and flue. If we find glazed creosote, the job may need chemical treatment first, which can add $100 to $250.
Chimney Inspection
Inspections are $125 to $350 depending on level. A Level 1 visual check suits an annual maintenance visit. A Level 2, camera-assisted inspection is what you need after a chimney fire, after an earthquake you suspect caused damage, or when you’re buying or selling a home. Sellers and buyers in Los Angeles routinely request Level 2 inspections during escrow.
Gas Fireplace Repair
Gas fireplace repair typically lands between $180 and $600. The most common culprits are a failed thermocouple, a dirty pilot assembly, a bad gas valve, or a remote receiver that’s stopped responding. We service the major brands and use components from professional suppliers like Gelco and Copperfield where they fit.
Relining and Masonry Work
This is where costs climb. A full DuraFlex stainless reline runs $2,500 to $6,500, depending on flue length and whether insulation is needed. HeatShield resurfacing falls in the $1,800 to $4,000 range for qualifying flues. Tuckpointing and masonry repair are priced per square foot, usually $500 to $3,000 total. Firebox rebuilds with new brick and mortar sit between $1,500 and $4,500.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Los Angeles?
A standard chimney sweep in Los Angeles costs $150 to $350, depending on flue condition and creosote level. That price includes the sweep plus a basic safety check of the firebox and damper. Call (336) 863-3889 for an exact quote – estimates are free.
Is it cheaper to repair or replace a gas fireplace?
Repair is almost always cheaper: most gas fireplace fixes run $180 to $600, while a full replacement typically starts around $2,500 and goes up from there. We’ll diagnose the actual problem and tell you straight whether a repair makes sense or whether you’re throwing money at a unit that’s near the end of its life. Call (336) 863-3889 and we’ll give you a written price before any work starts.
How much does chimney relining cost in Los Angeles?
Chimney relining in Los Angeles runs $2,500 to $6,500 for a full DuraFlex stainless liner. HeatShield resurfacing, which works for some flues that are still structurally sound, costs $1,800 to $4,000. The difference depends on flue length, insulation needs, and access. Call (336) 863-3889 for a free estimate on your specific flue.
Can you come today if I smell smoke in my house?
Yes – we answer the phone with a live person 24/7, and same-day emergency response is available in Los Angeles. If you smell smoke, stop using the fireplace, open a window, and call (336) 863-3889. We’ll walk you through what to do while we head your way.
How much does a chimney inspection cost in Los Angeles?
A basic Level 1 chimney inspection costs $125 to $200. A full Level 2 camera-assisted inspection, which you’ll want for a home sale or after a chimney fire, runs $250 to $350. Bundling it with a sweep usually saves money. Call (336) 863-3889 and we’ll quote both together.
Do you charge extra for the guarantee?
No. Our written guarantee on every repair – and our 365-Day Done Right Promise – is included at no extra charge. If a repair fails within the coverage period, the second visit is free.
What Sets Alcott Apart in Los Angeles
Plenty of chimney companies in Los Angeles will quote you a price. Fewer will show you who’s coming to your door, put the price in writing before starting, and back the work with a written guarantee. We do all three, and we’ve been doing it since 2002 as part of the Threshold Group family of home-service companies.
Our technicians are background-checked, identity-verified, uniformed, and announced to you by name and photo before arrival. That’s the Threshold Standard, and it’s how we operate on every single job. We carry professional trade materials – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because those are the brands chimney professionals specify, not substitutes that fail in a few seasons.
Before we ever pick up a tool, you’ll have a written price in hand. If the work isn’t right, we make it right. That’s the whole deal, and it’s why homeowners across Los Angeles call us back year after year.
Getting a Real Price for Your Chimney or Fireplace
Start with the range that fits your situation: $150 to $350 for a sweep, $125 to $350 for an inspection, $180 to $600 for a gas fireplace repair, and $2,500 to $6,500 for a full reline. Those are the honest Los Angeles numbers. When you’re ready for a price specific to your home, call (336) 863-3889 for a free estimate – we answer live, 24/7, and you’ll get a written price before any work begins.
You can also explore our home page to learn more about how we work and what we guarantee.
Pricing reflects the Los Angeles market as of 2026. Alcott Chimney Sweep offers free estimates – call (336) 863-3889.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep, serving Los Angeles since 2002.
What Our Customers Say
"Gas fireplace pilot kept going out. Cleaned the burner, replaced the thermocouple, and explained what failed. Works first try now."
- Alicia R."Cap, screen, and a full inspection with photos sent to my phone. Easy to understand and a fair price."
- Tomas Y."Very respectful of my home. Took off his boots and wiped the hearth when finished."
- Carol D.