Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Five Corners, WA
Five Corners, WA sits in unincorporated Clark County, where most homes were built during the 1980s and 1990s suburban expansion. That means the vast majority of chimneys here aren’t traditional masonry, they’re factory-installed zero-clearance prefab units from brands like Heatilator and Majestic. These systems corrode faster in our 42-plus inches of annual rain and have manufacturer-specific inspection requirements. We’re Alcott Chimney Sweep, and we work on these systems every week. Call (336) 863-3889 when you need a straight answer about your fireplace.
Why Five Corners Homes Are Different
Most of Five Corners was built as Clark County tract housing in the 1980s and 1990s. Developers put wood-framed ranch and two-story homes on the map quickly, and nearly every one came with a builder-grade zero-clearance fireplace. These prefab metal units have a shorter service life than masonry chimneys, and the wet Pacific Northwest climate accelerates their decline. We regularly see rust on the chase covers, warped refractory panels, and corroded termination caps in Five Corners homes that are only 25 to 30 years old.
The Southwest Clean Air Agency (SWCAA) adds another layer. During Columbia River basin temperature inversions, SWCAA issues mandatory wood-burning bans, sometimes with just 24 hours’ notice. Homeowners who comply and only burn during permitted windows tend to run hotter, longer fires in those sessions. That pattern builds creosote faster than typical seasonal use, which means a chimney that was fine in September can be a hazard by February. A pre-season check before the first November cold snap is genuinely worthwhile here.
Our Main Five Corners Services
Three services cover almost every chimney situation in Five Corners, and each has its own page with the full detail.
Chimney Sweep in Five Corners
A chimney sweep in Five Corners means removing creosote, the tar-like buildup that causes chimney fires, from the inside of your flue. On zero-clearance prefab units, this work has to follow the manufacturer’s clearance and brush specifications, not a mason’s rulebook. We sweep the flue, remove the debris, and check the visible components while we’re in there. If you’re overdue – and many Five Corners homes are, because these prefab units hide buildup behind fixed panels – this is the page that explains the full process. See Chimney Sweep in Five Corners for pricing and what to expect.
Chimney Inspection in Five Corners
Factory-built fireplaces in Five Corners have inspection requirements that traditional masonry chimneys don’t. The manufacturer expects specific clearances, venting configurations, and component conditions, and when one part fails, it often cascades. Our inspection is camera-based, so you see exactly what we see – we don’t ask you to take our word on a replacement recommendation. SWCAA burn bans make a clean, certified chimney the difference between a legal fire and a dark fireplace. The details are on Chimney Inspection in Five Corners.
Gas Fireplace Repair in Five Corners
Gas fireplaces in Clark County tract homes are often original to the house and well past their intended service life. We work on gas valves, thermocouples, thermopiles, pilot assemblies, and control modules on units from the brands installed here in the 80s and 90s. Whether your unit lights then dies, won’t light at all, or smells off, we diagnose the actual problem and quote a written price before any work happens. See Gas Fireplace Repair in Five Corners for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Five Corners
We stock and service professional trade brands, not box-store substitutes. That includes Famco caps and dampers, Copperfield chimney components, DuraFlex liner systems, and HeatShield resurfacing products. When a Five Corners chimney needs parts, we’re usually able to source them same-week from our regional supply network. See our brands for the full list.
Pricing for Chimney Company in Five Corners, WA
| Service | Typical range in Five Corners |
|---|---|
| Chimney sweep (standard, no repairs) | $180 – $340 |
| Chimney inspection (camera-based) | $150 – $290 |
| Gas fireplace diagnostic visit | $90 – $160 |
| Gas valve replacement | $250 – $480 |
| Thermocouple or thermopile replacement | $120 – $240 |
| Chase cover replacement | $300 – $600 |
| Refractory panel replacement | $200 – $400 per panel |
| Chimney cap replacement | $120 – $280 |
| Creosote removal (heavy buildup) | $250 – $500 |
Prices in Five Corners run toward the upper end of these ranges when homes have prefab units with corroded components or creosote buildup from hotter, longer burns during SWCAA-permitted windows. Every job comes with a written price before we start, so you’ll never get a surprise charge at the end.
Neighborhoods We Serve in Five Corners
We cover all of Five Corners and the surrounding Clark County communities. Our technicians are based in the Seattle metro area and dispatch into the region on a scheduled basis, so we ask for a little lead time when booking.
- Five Corners proper
- Orchards
- Brush Prairie
- Barberton
- Salmon Creek
Service Area – Cities Near Five Corners
While this page focuses on Five Corners, we also serve homeowners across the broader Washington region. If you’re outside the immediate area, you can find our service pages for Seattle, WA, Spokane, WA, Tacoma, WA, and Vancouver, WA to see how we work in those communities.
Serving Five Corners, WA - Our Local Coverage Area
We’re based in the Five Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Five Corners
We schedule Five Corners visits on a planned route basis, so the answer depends on our current dispatch calendar. Most appointments are booked within a week to ten days. If you have a suspected active problem, like smoke entering the house, call us and we’ll work you in sooner.
Clark County doesn’t require a permit for routine chimney sweeping or inspection. Some Five Corners HOAs have rules about exterior work, like cap replacement or chase cover repair, but most don’t restrict interior service. We’ll flag any HOA concerns during your booking.
Rusted chase covers and deteriorated refractory panels on 25-to-30-year-old prefab fireplaces. These zero-clearance units corrode faster in our wet climate than masonry chimneys would, and many homeowners don’t realize the damage until an inspection reveals it.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Five Corners Customers Say
"Good chimney cleaning. They found a small gap in the mortar and quoted the repair, which was a bit more than I wanted to spend. Did the sweep and left the repair for later without any pressure."
- Stuart L."Left no soot anywhere. Even brought a vacuum with a sealed filter. I'd use them again every fall."
- Beth H."Gas fireplace pilot kept going out. Cleaned the burner, replaced the thermocouple, and explained what failed. Works first try now."
- Alicia R.