Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Fresno, TX
Alcott Chimney Sweep handles chimney cleaning, inspection, and gas fireplace repair across Fresno, and the work here looks different than it does almost anywhere else in Texas. The San Joaquin Valley Air Pollution Control District’s no-burn rules mean Fresno fireplaces sit idle for long stretches, then get worked hard in short bursts when the air clears. That pattern creates creosote buildup, animal nesting, and moisture damage that don’t follow the same rhythm as unrestricted-burn cities. If your chimney hasn’t been looked at in a while, call Ruben Castellano’s team at (336) 863-3889 for a straight answer and a written price before any work starts.
Why Fresno Homes Are Different
Fresno’s chimney stock splits into two distinct types, and each one fails differently. In the Tower District, central Fresno, and the southwest side, post-WWII tract homes built between the 1950s and early 1980s still run on original masonry fireplaces with clay tile liners now 40 to 70 years old. Those liners crack, spall, and let heat reach combustible framing if they’re not inspected. North Fresno’s 1990s and 2000s expansion added thousands of factory-built zero-clearance metal fireplaces, which have their own service needs: warped panels, failed gaskets, and blocked venting that a standard masonry sweep won’t catch.
The climate compounds both. Winter temperature inversions trap Tule fog and particulate matter at ground level, which is what triggers the SJVAPCD’s no-burn days in the first place. Those same stagnant conditions leave chimneys cold and damp for weeks, and moisture accelerates creosote hardening and mortar deterioration inside the flue. Then summer shows up with 105°F days that thermally stress masonry crowns and mortar joints before a single fire has been lit. By October, many Fresno chimneys are cracked from heat expansion and crusted with creosote from the few legal burn windows that did open. We see it every season.
Our Main Fresno Services
Most Fresno homeowners call us for one of two reasons: they want the flue cleaned before burn season, or they want to know whether the fireplace is safe to use at all. All three of our services have their own dedicated Fresno page with pricing and specifics.
Chimney Sweep in Fresno
A proper sweep in Fresno removes more than soot. Because local fireplaces sit cold through long no-burn stretches, we often find hardened, glazed creosote, bird nests from starlings or Western Screech-Owls, and condensation-related flue damage that a basic brush pass won’t touch. Our technicians document what they remove and photograph what they find, so you’re never asked to approve a repair on faith. See full scope and Fresno pricing on the Chimney Sweep in Fresno page.
Chimney Inspection in Fresno
In a city where flues can go unused for three or more seasons because of burn bans, an inspection is the only way to know what moved in while you weren’t burning. We run camera equipment through the full flue length and deliver a photo report you can actually see. Older Tower District and central Fresno homes with original clay liners frequently show hairline cracks that need addressing before they widen. Get the full Level 1 and Level 2 breakdown on our Chimney Inspection in Fresno page.
Gas Fireplace Repair in Fresno
Gas fireplaces in Fresno’s newer north-side homes often act as the primary heat source during no-burn days, which means they log hours no one planned for. Thermocouples fail, valves stick, and log sets crack under repeated cycling. We service the major brands, stock common replacement parts, and diagnose before we quote. Everything we recommend comes with a written price and a written guarantee. Details on Gas Fireplace Repair in Fresno.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fresno
We install and repair DuraFlex liner systems, HeatShield resurfacing, Olympia Chimney components, Famco caps, and Copperfield products. These are the brands chimney professionals specify, not box-store substitutes. See the full list on our brands page, and ask which fits your Fresno fireplace when you call.
Pricing for Chimney Company in Fresno, TX
| Service | Typical range in Fresno |
|---|---|
| Standard chimney sweep (no repairs) | $180 – $290 |
| Chimney sweep with glazed creosote removal | $320 – $480 |
| Level 1 inspection (visual, no camera) | $110 – $180 |
| Level 2 inspection (camera, full flue) | $260 – $390 |
| Clay tile liner repair (minor, per section) | $400 – $800 |
| HeatShield resurfacing (per flue) | $1,200 – $2,400 |
| DuraFlex stainless liner install (typical home) | $2,500 – $4,800 |
| Chimney cap replacement (standard) | $150 – $350 |
| Masonry crown reseal | $350 – $650 |
| Gas fireplace diagnostic and repair | $120 – $380 |
What pushes prices higher in Fresno? Glazed creosote from long idle periods between burn days, animal nests that require removal before any cleaning can begin, and clay liners in older Tower District and central Fresno homes that are already too far gone for a patch. Whatever the situation, you’ll get a written price before any work begins. No surprises at the end of the job, ever.
Neighborhoods We Serve in Fresno
We work across Fresno, including these neighborhoods and everything around them:
- Tower District
- Central Fresno
- Southwest Fresno
- North Fresno
- Woodward Park area
If you’re in Fresno proper, expect scheduling within a few business days during shoulder season. Fall fills up quickly because everyone waits until the first no-burn lift, so call before October if you can.
Service Area – Cities Near Fresno
Our Fresno crews also serve the surrounding area, including Missouri City, TX, Manvel, TX, Stafford, TX, and Sugar Land, TX. Dispatch and scheduling are coordinated from our Houston office; the technicians who arrive are background-checked, identity-verified, and announced to you by name and photo before they ring the bell.
Serving Fresno, TX - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fresno
Most Fresno appointments are scheduled within two to five business days. Fall is our busiest stretch because the first legal burn days after summer send everyone calling at once. Book in late August or September and you’ll have your pick of slots. For a specific date, call (336) 863-3889.
Yes. The SJVAPCD issues no-burn days throughout winter whenever air quality falls below safe thresholds. During those days, wood burning is prohibited regardless of when your chimney was last cleaned. Gas fireplaces are typically exempt, which is one reason Fresno homeowners lean on them heavily. We can help you stay within the rules and keep burning safely when restrictions lift.
Most standard sweeps and inspections require no permit, and we’ll confirm that for your job before we start. If your repair scope does trigger a permit, we’ll tell you plainly and help you understand what the city needs. No one at Alcott will ever start permitted work without the paperwork in order.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fresno Customers Say
"Left no soot anywhere. Even brought a vacuum with a sealed filter. I'd use them again every fall."
- Beth H."Gas fireplace pilot kept going out. Cleaned the burner, replaced the thermocouple, and explained what failed. Works first try now."
- Alicia R."Cap, screen, and a full inspection with photos sent to my phone. Easy to understand and a fair price."
- Tomas Y.