Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Gas Fireplace Repair Across Clovis
If your gas fireplace in Clovis won’t light, smells like gas when it runs, or flames look weak and yellow instead of steady and blue, we can usually diagnose the issue on the first visit. Most repairs on the factory-built units common in Clovis tract homes run between $180 and $450 when it’s a thermopile, thermocouple, gas valve, or igniter problem, though firebox panel replacement or flue liner work runs higher because those parts are structural, not cosmetic. We’ve worked on hundreds of the zero-clearance metal fireplaces that dominate neighborhoods from Harlan Ranch to the subdivisions off Temperance Avenue, and we know exactly what fails on them here. Call (336) 863-3889 when something doesn’t sound, smell, or look right.
Why Alcott Chimney Sweep Is Your Best Choice for Gas Fireplace Repair in Clovis
We’re a chimney service first, not a generalist appliance repair shop, and that matters in Clovis specifically because the failure modes here are flue problems, not just firebox parts. The tule fog that settles over the San Joaquin Valley in winter doesn’t just sit on the roads. It finds its way down chimneys that sit idle during SJVAPCD no-burn curtailment days, and on metal-lined prefab systems, that moisture does damage inside the flue that a technician staring only at the gas valve will never see.
Led by Ruben Castellano and operating within the Threshold Group family of home-service companies since 2002, Alcott Chimney Sweep sends background-checked, identity-verified technicians to Clovis homes. Before the truck arrives, you’ll know the technician’s name and see a photo. At the door, they’ll show a photo ID badge. No exceptions, every time. That’s the Threshold Standard, and it’s not an optional upgrade for Clovis homeowners who want to know exactly who is walking into their house.
Every repair comes with a written price before work begins and a written guarantee on the completed job. If the repair fails within the coverage period, the second visit is free. That’s the 365-Day Done Right Promise: a full year of accountability, in writing, on every gas fireplace repair we perform in Clovis.
Our Gas Fireplace Repair Services in Clovis
Gas Fireplace and Prefab Firebox Panel Inspection with On-Camera Evidence
If there’s one thing we insist on for Clovis homeowners, it’s this: don’t accept a recommendation to replace a firebox panel or liner section without seeing the damage yourself. We run a camera into the firebox and flue on a repair visit, pull stills, and walk you through exactly what we’re seeing on the monitor. In the 1990s and 2000s tract homes that dominate Clovis, the factory-built metal fireboxes corrode internally when damp tule-fog air sits in the flue for weeks, especially during extended no-burn curtailment periods. That corrosion cracks firebox panels and seizes dampers. We’ll show you the crack before we quote the repair.
Level 2 Inspection for Venting and Flue Liner Condition
Clovis’s older prefab units and the masonry chimneys near Old Town Clovis need different things from a Level 2 inspection. For the metal-flue prefab systems, we’re looking for corrosion pitting, separated liner sections, and creosote trapped under moisture. For the older homes near Clovis Avenue and Pollasky, we’re checking clay-tile liner spalling and crown mortar deterioration. A Level 2 inspection includes camera scoping of the entire flue, from firebox to termination cap, and you get the images. If your gas log set is venting into a flue that was never sized for it, we’ll tell you plainly.
Chimney Cap and Crown Repair to Block Tule-Fog Moisture Intrusion
The same winter inversions that trigger SJVAPCD no-burn alerts push dense, damp valley air down Clovis flues for weeks at a time. A damaged cap or cracked crown lets that moisture in continuously. On a prefab metal system, that means corrosion on the damper plate and firebox components. On a masonry chimney, it means water migrating down the flue and misdirecting the draft that gas appliance venting depends on. We repair crowns, replace caps, and install proper flue termination hardware using materials from Copperfield and Olympia Chimney. This is preventative work that buys years on a Clovis fireplace that would otherwise rot from the top down.
Thermopile, Thermocouple, Gas Valve, and Igniter Repair
When a Clovis gas fireplace won’t hold a flame or the pilot won’t stay lit, the thermopile and thermocouple are the first things we test. These are the small sensors that prove there’s a flame and send the signal to open the gas valve, and they’re the most common failure on units in Clovis homes that sit unused through no-burn stretches, then get used heavily on the few legally permitted burn days. A thermopile replacement in Clovis typically runs $180 to $280, including the part and labor. A gas valve replacement runs $300 to $500, and we’ll always show you the failed part before and after we put the new one in.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clovis
We work on factory-built units from every major prefab manufacturer, but what matters more is the materials we use when we fix them. Our technicians carry and install professional trade brands: DuraFlex liner systems, Copperfield chimney caps and chase covers, and Olympia Chimney components. These are the materials chimney professionals specify, not box-store substitutes, and they’re available locally for Clovis service calls because our crews serve the city from our Central Valley dispatch office in Fresno. That means faster turnaround when your repair needs a specific liner section or cap replacement.
Common Gas Fireplace Repair Problems We See in Clovis Homes
- Corroded damper plates and seized dampers on prefab units. Tule fog sits in the metal flue during weeks of no-burn curtailment, especially in tract homes built off Fowler Avenue and Shepherd Avenue, and the damper is the first component to suffer.
- Stage-2 creosote trapped under moisture inside metal flue liners. Homeowners who burn illegally on SJVAPCD alert days, then let the system go cold and damp for weeks, create exactly the conditions that turn light creosote into sticky, corrosive deposits that cling to the liner wall.
- Spalling clay-tile liners and cracked crowns in older Old Town Clovis chimneys. Masonry chimneys from the mid-century and earlier suffer water intrusion at the crown, and once the flue liner starts spalling, the draft that gas venting depends on gets unreliable.
- Failed thermopiles from heavy intermittent use. Clovis fireplaces that sit dormant for weeks, then run for hours straight on a permitted burn day, put stress on the thermopile that manifests as a pilot light that won’t stay lit when you try to use it again.
Pricing for Gas Fireplace Repair in Clovis, CA
Here’s what we charge in Clovis, in real numbers. A service call and diagnosis runs $89 to $129, and that fee is waived when you approve the repair on the same visit. Thermopile or thermocouple replacement runs $180 to $280. Igniter module replacement runs $160 to $260. Gas valve replacement runs $300 to $500. Firebox panel replacement on a factory-built prefab unit starts around $400 and can reach $900 depending on the panel configuration. Flue liner repair or partial relining with a DuraFlex system starts around $700 and goes up based on flue length and diameter. Every one of those prices is written down before we start work. You’ll never get a surprise number at the end of the job. Call (336) 863-3889 for a free estimate on your specific Clovis fireplace, and we’ll give you a written range before we schedule anything.
We Also Serve Cities Near Clovis
Our Gas Fireplace Repair team serves all of Clovis County and the surrounding Central Valley including Clovis, plus Fresno, Sanger, Fowler, and Madera. If you’re in a nearby area and need gas fireplace work, we’ll give you the same pricing structure, the same camera-evidence standard, and the same 365-Day Done Right Promise.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gas Fireplace Repair in Clovis
A gas smell when the unit is running usually points to incomplete combustion or a venting problem, not a dirty fireplace, and in Clovis it’s often tied to the curtailment cycle: the unit sat damp for weeks while tule fog sat in the flue, then you fired it up and the corroded damper or restricted flue disrupted the draft. We’ll do a camera inspection to check the flue, the damper, and the firebox panels, and we’ll tell you whether it’s a cleaning issue or a repair. The simple answer is that if it smells like gas, the system is not drafting correctly, and that’s worth a diagnostic call. Call (336) 863-3889 and we’ll come out.
A factory-built, zero-clearance metal fireplace drafts differently than a masonry chimney because the flue is smaller, the metal liner transfers heat faster, and the entire system is more sensitive to pressure differentials inside the house. In Clovis specifically, the 1990s and 2000s tract homes were built tight and the prefab flues sometimes weren’t sized for the gas appliances vented into them. When you add weeks of damp tule fog sitting in the flue during no-burn periods, the damper plate corrodes and restricts the opening even further, and the draft gets progressively worse. A Level 2 inspection will show you exactly where the restriction is.
Yes, and more than most homeowners realize. The San Joaquin Valley Air Pollution Control District’s wood-burning curtailment program means Clovis fireplaces sit idle for weeks or months during winter health-alert days, and when they do run, it’s on a compressed schedule of legally permitted burn days. That feast-or-famine pattern accelerates corrosion on metal flue liners, stresses thermopiles and gas valves, and traps moisture over creosote buildup. We see it every winter on repair calls in Clovis.
In most cases, yes. Firebox panels on factory-built units are replaceable components, and we can source the correct panel configuration for your specific model rather than recommending a whole new fireplace. We’ll show you camera stills of the damaged panel, confirm the model number and panel size, and give you a written quote for the replacement before we order anything. It’s rare that a cracked panel means the entire unit is done, and in Clovis we’ve replaced hundreds of panels without ripping out a single chase.
Annually, even if you never use it. In Clovis, an unused fireplace is not a maintenance-free fireplace: the damp winter fog that sits in the flue during no-burn curtailment periods corrodes metal components whether you light the unit or not. We recommend an annual inspection with camera scoping so you catch corrosion on the damper plate, firebox panels, and liner sections before they become expensive repairs or safety hazards. If you haven’t had it looked at in years, call (336) 863-3889 and we’ll schedule the inspection. The quote is free and the camera time is included.
Call Alcott Chimney Sweep for Gas Fireplace Repair in Clovis, CA
If your gas fireplace in Clovis is acting up, call (336) 863-3889. A live person answers every call, any hour, and we’ll get you scheduled with a named, photo-verified technician who serves Clovis directly. You’ll get a written price before any work begins, camera evidence for any repair we recommend, and a 365-Day Done Right Promise in writing. That’s how Ruben Castellano and the Alcott Chimney Sweep team do business in Clovis, and that’s how you’ll know exactly what you’re paying for before the first tool comes out of the truck.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep, bringing straight answers and camera-proven repairs to Clovis homeowners.