Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Queens, NY
Chimney work in Queens isn’t the same job it is across the river in Manhattan or out on Long Island. Most of the chimneys we’re called to in Woodhaven, Middle Village, Glendale, and Richmond Hill sit atop 1920s-to-1940s attached brick row houses, and many were originally built around oil-fired boilers that no longer exist. Those aging masonry stacks now vent gas appliances they weren’t designed for, and Queens winters hammer the mortar joints every year. If you’re looking for a chimney company in Queens that will show you exactly who’s coming to your door and put a written price in your hand before any work starts, call Alcott Chimney Sweep at (336) 863-3889.
Why Queens Homes Are Different
Queens has one of the highest concentrations of century-old masonry chimneys in New York City. The attached and semi-detached brick row houses and Tudor-style homes built between 1910 and 1950 pack multiple flues into single stacks, often serving a fireplace on one floor and a heating appliance on another. That complicates a cleaning job before we even set up the ladder: we have to verify which flue connects to which appliance, and whether both are safe to sweep in the same visit.
Freeze-thaw cycles are the other constant. Water gets into hairline cracks in the mortar, freezes, expands, and over decades the joints crumble. Spalling brick faces and repointing work are common companion repairs after a Queens cleaning visit. Along Jamaica Bay and the Rockaway Peninsula, salt-laden marine air corrodes caps, dampers, and metal flashings faster than it does just a few miles inland in Forest Hills or Rego Park. None of this is exotic; it’s just the reality of maintaining a masonry chimney in this borough.
Our Main Queens Services
Most Queens homeowners reach out to us for one of three reasons. Each has its own dedicated page with pricing, timelines, and what to expect from the technician visit.
Chimney Sweep in Queens
A standard sweep in Queens removes creosote, the tar-like flammable buildup that causes chimney fires, along with soot, nesting debris, and anything else blocking the flue. In attached row houses, we pay close attention to shared chimney stacks. In Middle Village and Glendale, two homes often share a single stack across a party wall, and we verify which flue belongs to your unit before starting. You’ll get a camera inspection and photo report with every sweep. Details on pricing and pickup timing are on the Chimney Sweep in Queens page.
Chimney Inspection in Queens
An inspection in Queens is as much about the liner as the flue. Most of these homes converted from oil to gas heat decades ago, and gas exhaust is lower-temperature and full of moisture. That moisture condenses inside the original clay tile liners and deteriorates them from the inside out. A proper inspection with a camera tells you whether the liner is sound, whether the mortar joints are failing, and whether a stainless steel relining job is in your near future. We’ll show you the images and explain exactly what you’re seeing. Full scope and pricing are on the Chimney Inspection in Queens page.
Gas Fireplace Repair in Queens
Gas fireplaces in Queens row houses and Tudor-style homes need repair for the same reasons they do anywhere: failed thermocouples, clogged burner ports, faulty valves, and pilot assemblies that won’t stay lit. What’s different here is how often the venting itself is the root cause. Homes near Jamaica Bay and the Rockaways deal with salt corrosion on dampers and caps, and older vent runs in converted heating systems pull condensation back into the unit. We stock parts from Famco and Copperfield and service most major gas fireplace brands. See the Gas Fireplace Repair in Queens page for what we cover and approximate costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Queens
We carry and install professional trade materials: DuraFlex liner systems, HeatShield resurfacing, and components from Famco and Copperfield. We keep common parts stocked locally for Queens jobs, so most repairs don’t wait on a warehouse shipment. See our brands for the full list.
Pricing for Chimney Company in Queens, NY
| Service | Typical range in Queens |
|---|---|
| Standard chimney sweep | $180 – $340 |
| Chimney inspection (Level 1) | $150 – $300 |
| Chimney inspection (Level 2, with camera) | $250 – $500 |
| Gas fireplace service call | $125 – $200 |
| Gas fireplace repair (common parts) | $175 – $450 |
| Chimney cap replacement | $250 – $600 |
| Damper replacement | $200 – $500 |
| Stainless steel liner (installed) | $2,500 – $6,000 |
What pushes a Queens price upward is access and stack condition: a multi-story row house with a shared chimney stack requires more setup and verification than a freestanding single-flue home. Whatever the job, you’ll receive a written price before any work begins. No surprises at the end.
Neighborhoods We Serve in Queens
We work across the borough. Scheduling is coordinated from Alcott’s New York City office, and crews serve Queens locally. You’ll know your technician’s name and see their photo before the truck pulls up, and they’ll show a photo ID badge at the door.
- Woodhaven
- Richmond Hill
- Middle Village
- Glendale
- The Rockaways
Most Queens appointments can be scheduled within a few business days. Call (336) 863-3889 and a live person will answer.
Service Area – Cities Near Queens
While our Queens crews work locally across the borough, Alcott Chimney Sweep also serves nearby areas through our network of technicians. If you’re across the water or upstate, see Manhattan, NY, Staten Island, NY, or Buffalo, NY. We also have a team serving Brooklyn, OH for homeowners in that market.
Serving Queens, NY - Our Local Coverage Area
We’re based in the Queens area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Queens
Most Queens appointments are scheduled within a few business days. We don’t promise same-day sweeps; we’d rather give you a real time and show up when we said we would. Every technician is background-checked and identity-verified before they ever step on your property.
Most routine sweeps and inspections don’t require a permit. Structural repairs, like rebuilding a stack or relining with a stainless steel system, may require a Department of Buildings filing depending on the scope. We’ll tell you plainly if your job crosses that line before any work begins.
In attached row houses, a shared stack means shared responsibility. If your flue and your neighbor’s flue run through the same masonry stack, repairs to the stack itself usually need both owners involved. We’ll document what’s yours, what’s shared, and what each side needs to know before any work is scheduled.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Queens Customers Say
"Water was leaking around the flashing. They resealed it and installed a new crown coating. Dry through two heavy rains since."
- Douglas P."Fast and tidy. Fireplace draws properly again."
- Mina K."Good chimney cleaning. They found a small gap in the mortar and quoted the repair, which was a bit more than I wanted to spend. Did the sweep and left the repair for later without any pressure."
- Stuart L.