Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Sultan, WA
A chimney cleaning in Sultan, WA typically runs $189 – $289 for a standard sweep, and because of how this valley holds moisture and how long burning seasons stretch here, most Sultan homes also need a camera inspection before we can say the flue is actually safe. We’re Alcott Chimney Sweep. Every job starts with a written price before any work begins, and the technician arriving at your door has already been sent to you by name and photo. Call (336) 863-3889 and a live person answers, day or night.
Why Sultan Homes Are Different
Sultan sits deep in the Skykomish River valley at the foot of the Cascades, where annual rainfall runs well above what lowland Snohomish County cities see. That matters for chimneys. Persistent valley moisture combined with long, heavy wood-burning seasons produces creosote buildup faster than what we see in Monroe or Duvall. Add freeze-thaw cycles that spall brick mortar and fail flashing, and a Sultan chimney often needs more than a basic sweep to stay safe.
The housing stock compounds it. Sultan grew as a Skykomish valley logging and railroad town, and a good share of homes date to the early and mid 1900s. Many still have original brick masonry chimneys built for older stoves and coal-era flue diameters. Decades of wet Pacific Northwest weather have eroded joints and cracked flue tiles, which means cleaning and inspection frequently turn up the need for relining or repointing. We expect that here, and we’re upfront about it before we ever recommend work.
There’s one more Sultan-specific pattern worth knowing. On still, cold winter mornings, cold dense air pools in the valley and reverses chimney draft, pushing smoke back into the firebox. Homeowners here misdiagnose that as a dirty chimney far more often than in open-terrain towns like Monroe, just twelve miles west. Our technicians know to ask about that symptom before assuming a blockage. That’s the kind of local knowledge that keeps you from paying for a fix you don’t need.
Our Main Sultan Services
Most Sultan homeowners call us for one of two reasons: smoke backing up into the house, or a fireplace that hasn’t been looked at in years. The three services below each have their own Sultan page with full pricing and local detail.
Chimney Sweep in Sultan
A standard sweep in Sultan removes creosote, the tar-like buildup that causes chimney fires, along with soot and any debris that’s dropped in from the flue. Because of the valley’s moisture and long burn seasons, we recommend Sultan homes on wood heat get swept annually, not every other year. We cover your hearth and floors, run brushes sized to your flue, and leave the firebox clean. Full pricing and what to expect are on the Chimney Sweep in Sultan page.
Chimney Inspection in Sultan
An inspection in Sultan includes a camera run through the flue so you can see exactly what we see, whether that’s cracked tiles, missing mortar, or a liner that’s reached the end of its life. For older early-to-mid-century Sultan homes with original brick chimneys, we recommend a Level 2 inspection at minimum before the first burn of the season. You’ll get a photo report, not a vague warning. Details are on the Chimney Inspection in Sultan page.
Gas Fireplace Repair in Sultan
Gas fireplaces in Sultan homes fail in predictable ways: thermocouples wear out, pilot assemblies clog, and valley moisture corrodes connections faster than in drier climates. If your gas fireplace lights but won’t stay lit, or shuts off mid-burn, we diagnose it with the same no-surprises pricing as every other job. No repair is recommended without you seeing the evidence. The Gas Fireplace Repair in Sultan page covers common failures and costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Sultan
We carry and install professional trade materials including DuraFlex liner systems, HeatShield resurfacing, and Copperfield components, plus parts from Famco. That means a common Sultan repair, like relining an old flue, doesn’t wait on a special order. See our brands for the full list.
Pricing for Chimney Company in Sultan, WA
| Service | Typical range in Sultan |
|---|---|
| Standard chimney sweep (single flue, wood-burning) | $189 – $289 |
| Chimney sweep with creosote buildup beyond typical | $240 – $340 |
| Chimney inspection (Level 1, visual) | $129 – $199 |
| Chimney inspection (Level 2, with camera) | $249 – $379 |
| Chimney cap installation (standard cap) | $220 – $390 |
| Chimney cap with custom fitting (unusual crown or flue size) | $330 – $520 |
| Gas fireplace repair (diagnostic fee) | $89 – $149 |
| Gas fireplace repair (thermocouple or pilot assembly) | $180 – $350 |
| Gas fireplace repair (valve replacement) | $280 – $520 |
| Flue relining (per foot, installed) | $95 – $150 |
| HeatShield resurfacing (typical project) | $1,500 – $3,500 |
What pushes price up in Sultan is age. Flues built for coal-era stoves often need custom cap fitting or a full reline, and we quote that honestly after the camera shows us what’s inside. You’ll always get a written price before any work starts, and nothing changes after the fact.
Neighborhoods We Serve in Sultan
We cover all of Sultan, including the older residential blocks near the river, the homes up toward Sultan Basin Road, and the newer builds along the highway corridor. If you can receive mail in Sultan, we’ll come out.
- Downtown Sultan / Main Street area
- Skykomish River residential area
- Sultan Basin Road
- Wallace Street and the north hill
- U.S. 2 corridor homes east of town
Most Sultan appointments are scheduled within a few business days, and we route by neighborhood so we’re not crisscrossing the valley all day.
Service Area – Cities Near Sultan
Beyond Sultan, our crews serve nearby communities up and down the Skykomish valley and into the Snohomish lowlands. We regularly work in Monroe, GA, Duvall, WA, Snohomish, WA, and Granite Falls, WA. If you’re in one of those towns, the same written-price, technician-preview service applies.
Serving Sultan, WA - Our Local Coverage Area
We’re based in the Sultan area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Sultan
Yes. We cover every neighborhood in Sultan, from the downtown core to Sultan Basin Road and the homes along U.S. 2. As long as you’re within Sultan city limits or the immediate valley area, we’ll schedule you. Call (336) 863-3889 and we’ll confirm your address on the spot.
Most cleanings and inspections don’t require a permit, and most repairs don’t either. For major structural work, we’ll tell you during the quote if anything needs approval from the city or county. You won’t be surprised by paperwork after the fact. Call (336) 863-3889 with your address and we’ll check before we schedule.
We schedule most Sultan appointments within a few business days. Emergency situations, like smoke backing up on a cold valley inversion night, get priority. A live person answers the phone around the clock, so call (336) 863-3889 and we’ll work out the next available slot for your street.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sultan Customers Say
"Good chimney cleaning. They found a small gap in the mortar and quoted the repair, which was a bit more than I wanted to spend. Did the sweep and left the repair for later without any pressure."
- Stuart L."Left no soot anywhere. Even brought a vacuum with a sealed filter. I'd use them again every fall."
- Beth H."Gas fireplace pilot kept going out. Cleaned the burner, replaced the thermocouple, and explained what failed. Works first try now."
- Alicia R.