Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across Roanoke
A chimney inspection in Roanoke typically costs $189 – $489 depending on the level of inspection your fireplace needs. Most inspections on Roanoke’s builder-grade gas fireboxes run $189 – $289 for a standard Level 1, while a Level 2 camera inspection with a full write-up runs $389 – $489. We schedule inspections across Roanoke within a few business days and confirm exactly who will arrive before the appointment. Call (336) 863-3889 and a live person answers, any hour.
Here’s what matters for Roanoke specifically. Your house may look brand new from the curb, but most homes off Roanoke Road and near the Alliance corridor were built between 2001 and 2015. That puts their original prefabricated gas fireplaces at 10 – 20 years old. Refractory panels crack. Door gaskets wear flat. Chase covers rust through at the seams. None of it is visible from the living room. We find these failures weekly in Roanoke because the subdivisions were built street-by-street by the same builder with identical fireplace packages.
Ruben Castellano leads our inspection team, and the technician assigned to your home has passed a background check and identity verification under the Threshold Standard. You’ll see their name and photo before we arrive, and they’ll show a photo ID badge at the door. No exceptions.
Why Alcott Chimney Sweep Is Roanoke’s Preferred Chimney Inspection Company
Roanoke homeowners call us because we name the technician before the appointment and show their photo. That matters when you’re home with young kids or expecting a stranger at the door. Every Alcott tech is background-checked and identity-verified through the Threshold Standard. When the truck pulls up, the person standing there is exactly who we told you to expect. Name, face, badge. It’s how we’ve operated since 2002.
We also give you a written price before any work starts. If the inspection turns up a cracked refractory panel or a rusted chase cover, you’ll know the repair cost before you approve anything. There’s no surprise invoice at the end. And every repair we make carries a written guarantee. If it fails within the coverage period, the second visit is free. That’s our 365-Day Done Right Promise, and it’s included on every job, not sold as an upgrade.
Roanoke response times are short because our scheduling is coordinated from the Dallas-Fort Worth office, with crews dispatched directly to Roanoke neighborhoods. We know the streets off Highway 377, the subdivisions around Roanoke Road, and the newer builds near the Alliance logistics corridor. That local familiarity means we can tell you before we arrive whether your fireplace is the same make and model as the other houses on your block.
Chimney Leak in Roanoke
A chimney leak in Roanoke usually traces back to a rusted chase cover or a failed seal where the prefab chase meets the roofline, and the fix typically runs $240 – $650 depending on whether the flue liner has taken water. Denton County’s expansive clay soils make this worse. The ground swells and shrinks through the year, which shifts the chase enclosure just enough to open hairline gaps at the flashing. Water gets in. Stains spread across the ceiling, and most homeowners blame the roof.
Chase Cover Rust and Seam Failure
Builder-grade chase covers are galvanized steel with seams welded or crimped. After a decade of North Texas rain, ice, and summer baking, those seams rust through. On one Roanoke street, a homeowner called us after rust streaks appeared down her prefab chase. When our tech pulled the cap, water had been running down the flue for at least two seasons. The ceiling stain followed months later, then the cracked refractory panels.
Clay Soil Heave and Flashing Gaps
Roanoke sits in Denton County, where the clay contracts hard in summer and swells after heavy rain. That movement cycles every year, and on chimneys that are actually prefab metal chases, it works the flashing loose at the roofline. The gap is usually less than a quarter inch. It’s enough. We re-seal and refit flashing as part of the repair, but the real fix is catching the shift early before water reaches the firebox.
Chimney Camera Inspection in Roanoke
A chimney camera inspection in Roanoke costs $389 – $489 and is the only way to see damage inside a gas flue liner that looks fine from the outside. We run a small camera down the flue and record what we find. You see the footage. The written report tells you exactly what’s wrong, what it costs to fix, and whether it can safely wait. You approve nothing without seeing the evidence yourself.
Finding Freeze-Thaw Damage from February 2021
The February 2021 Winter Storm Uri put sustained freezing temperatures into chimneys across Denton County. Flue liners cracked. Refractory panels shattered. Chase covers buckled at the seams. A lot of that damage is still hidden because the fireplace still lights and nothing smells odd. The camera doesn’t guess. It shows the crack, the gap, or the rust, and then we talk about whether it’s a repair or a replacement.
What We Photograph and Why
Every camera inspection includes photos or video of the flue interior, the refractory panels, the firebox, the gasket, and the chase cover if access allows. You keep the report. If we recommend a liner repair or a HeatShield resurfacing, you’ll see the reason in the photos before anyone touches a tool. That’s the standard Ruben Castellano set for this company: no recommendation without visual proof the homeowner can verify.
Trusted Brands We Service in Roanoke
Most chimneys in Roanoke are prefabricated units from builder packages, and the parts inside matter. We service and install professional trade materials from HeatShield, Gelco, Famco, Olympia Chimney, and others that chimney professionals specify, not box-store substitutes. Because so many Roanoke subdivisions share identical fireplace models, we keep common parts staged for fast turnaround. A cracked refractory panel or a failed gas door gasket on a typical Roanoke prefab usually means sourcing the part same-week, often same-day, so repairs don’t drag across two billing cycles.
Common Chimney Inspection Problems We See in Roanoke Homes
- Cracked refractory panels in 10 – 20-year-old gas fireboxes. These are the cement-like panels lining the firebox. They crack from heat cycling and from moisture that seeps in through worn chase covers. You can’t see the cracks while the unit is off and the glass is in place. We find them routinely in Roanoke homes built in the 2000s.
- Rusted chase covers leaking water down the flue. The galvanized top on a prefab chase catches every rain and ice event. Once the seams rust through, water follows the flue down and soaks the firebox, the hearth framing, and eventually the ceiling. Roanoke’s spring storms and winter ice cycles accelerate this.
- Deteriorating door gaskets that haven’t been opened in years. The fiberglass rope gasket around the glass door flattens and sheds. A loose gasket lets room air into the combustion chamber and throws off the burn. Most Roanoke homeowners have never opened the glass on their gas fireplace, and the gasket quietly disintegrates.
- Freeze-thaw cracks hiding from the February 2021 storm. That week of sustained freezing temperatures pushed water into every seam, liner, and crown across Denton County. Some cracks are structural. Some are cosmetic. The only way to tell is a camera down the flue. We still find them on houses where the fireplace works fine.
Pricing for Chimney Inspection in Roanoke, TX
A Level 1 visual inspection in Roanoke runs $189 – $249. A Level 2 camera inspection with a written report runs $389 – $489. Level 3 inspections, which involve partial demolition or structural access, are quoted per job and usually start around $900. What affects the price on a Roanoke prefab fireplace: roof height and chimney access, whether we need to remove a chase cover, and whether the unit is gas, wood, or dual-fuel. There’s no charge for the estimate. Call (336) 863-3889, tell us the year your house was built and the neighborhood, and we’ll give you an exact quote before the appointment. A written price always comes before any work starts.
We Also Serve Cities Near Roanoke
Our crews handle Chimney Inspection calls in Flower Mound, Southlake, Argyle, and Justin as well. If you’re across the Roanoke line in a neighboring Denton County community, the same tech-verified process and written pricing apply. Learn more about our work in Roanoke or call for scheduling across the whole area.
Serving Roanoke, TX - Our Local Coverage Area
We’re based in the Roanoke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Roanoke
Yes. The fireplace you barely burn is still aging. Refractory panels crack from temperature changes and moisture exposure, not just from use. Door gaskets dry out and flatten whether you light the unit twice a winter or twice a week. And a rusted chase cover doesn’t care how often you burn. Annual Level 1 inspections catch these things on Roanoke homes built in 2008 before the ceiling stain shows up. Call (336) 863-3889 to schedule one.
Yes, and we see it regularly. The sustained freezing temperatures pushed water into flue liners, crowns, and chase seams. Some cracks are visible. Others sit behind the refractory or inside the liner where they only show up on a camera pass. The fireplace lights fine, the smell is fine, and the damage is real but silent. A Level 2 camera inspection in Roanoke costs $389 – $489 and gives you the answer in footage you can see yourself.
Because in Roanoke’s newer subdivisions off Roanoke Road and near the Alliance corridor, entire streets were built by the same builder in the same 12-month window with identical fireplace packages. If your refractory panels crack or your chase cover rusts through, the same defect is almost certainly present in every third house on the block. We knocked on those doors because we knew what to look for. That’s what happens when a company actually inspects chimneys in Roanoke instead of just passing through.
A Level 2 inspection on a Roanoke prefab fireplace includes everything in a Level 1 visual check, plus a camera run through the flue, a close-up examination of the refractory panels and door gasket, removal of the chase cover if needed, and a written report with photos. We check for rust, cracks, gaps, and water entry points. You get the findings and a written price for any repair before you decide anything. Cost runs $389 – $489.
A chimney that needs a cap is a chimney that hasn’t yet leaked. The cap keeps rain and animals out. A leak means water is already inside, which usually means the chase cover has rusted through or the flashing has pulled away at the roofline. In Roanoke, by the time you see a water stain on the ceiling, the leak has usually been running for months. We can tell you which one you have in about 30 minutes. Call (336) 863-3889 and we’ll schedule the visit.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep, serving Roanoke since 2002.